Home page Home page Hobbies & Garden Development boards Bluetooth 5.0 Audio Receiver Module 10 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY
Bluetooth 5.0 Audio Receiver Module 10 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

Bluetooth 5.0 Audio Receiver Module 10 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

Ten Bluetooth 5.0 receivers on boards for wireless music playback to speakers or amplifiers. Powered via USB-C or from a battery and jack. Full description
In stock
€30.96
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 Audio Receiver Module 10 pcs with USB-C Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power Supply 3.7 to 5 V Black DIY

In the package, you will receive ten identical wireless audio receivers. Each one is a small electronic board that adds Bluetooth to older speakers, amplifiers, headphones, or home audio systems. The module operates with Bluetooth 5.0 technology and is powered via a USB-C connector. A phone, tablet, or laptop pairs with it just like a regular wireless speaker, and music is then played directly to the connected device. The board measures 30 x 30 mm, making it suitable for smaller enclosures or inside a speaker. The set is ideal for DIY enthusiasts who want to equip a larger number of devices at once, prepare materials for a club or workshop, and have plenty of spare modules available.

The sound comes from the stereo jack socket 3.5 mm, to which you can connect headphones, active speakers, or the AUX input of an amplifier. Next to the socket, there are also soldering pads for the left and right channels on the board, allowing the output to be wired directly to the amplifier's input. Power is supplied via a cable with a USB-C connector, which is used by most phones, chargers, and power banks today, so you do not need to look for a special adapter. For permanent installation, there is a soldering pad BAT for an external lithium cell with a voltage of 3.7 V. The module operates with a power supply voltage of 3.7 to 5 V, and a blue LED indicates the connection.

  • Type – Bluetooth audio receiver and sound decoder in the form of a board
  • Bluetooth Version – 5.0
  • Supported Profiles – A2DP, AVCTP, AVDTP, AVRCP, and HFP
  • Range – 15 m in direct line of sight
  • Power Supply – USB-C 5 V or soldering pad for lithium cell 3.7 V
  • Power Supply Voltage – 3.7 to 5 V
  • Audio Output – stereo jack 3.5 mm and soldering pads for left and right channels
  • Signal-to-Noise Ratio – 90 dB
  • Dynamic Range – 91 dB
  • Total Harmonic Distortion THD+N – -70 dB
  • Crosstalk – -86 dB
  • Indication – blue LED in Bluetooth mode
  • Dimensions – 30 x 30 mm
  • Board Colour – black
  • Number of Pieces – 10 identical boards
  • Package Contents – 10 Bluetooth audio receiver boards of the same design without cables and casing

The module is supplied as a bare board without a casing, so protect it from moisture, dust, and short circuits during installation. It is advisable to secure the board using the mounting holes in the corners and ensure that the underside does not touch any metal parts. The antenna is printed directly on the board, so do not cover it with metal, as this may reduce the range. When soldering power and audio wires, proceed carefully and observe the correct polarity.

A wireless receiver with a USB-C connector in a pack of ten is a practical solution for getting music from a mobile device to several devices that do not have Bluetooth. Thanks to its compact dimensions and power supply via USB-C or from a battery, it can be easily integrated into a home project. The output via the 3.5 mm jack can connect both headphones and an amplifier, and the soldering pads allow for a secure connection. The black board with a range of 15 m is suitable for repairing old radios, teaching in clubs, creating your own speakers, and other DIY projects.

Price incl. VAT €30.96