Home page Home page Hobbies & Garden Development boards Bluetooth 5.0 Audio Receiver Module 10 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Jack 3.5 mm Power Supply 3.7 to 5 V Black
Bluetooth 5.0 Audio Receiver Module 10 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Jack 3.5 mm Power Supply 3.7 to 5 V Black

Bluetooth 5.0 Audio Receiver Module 10 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Jack 3.5 mm Power Supply 3.7 to 5 V Black

Pack of ten Bluetooth 5.0 modules for receiving music to speakers and amplifiers. Powered via Micro USB or from a battery, with output through a 3.5 mm jack. Full description
In stock
€30.09
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 Audio Receiver Module 10 pcs with Micro USB Connector Decoder Board 30 x 30 mm Stereo Jack 3.5 mm Power Supply 3.7 to 5 V Black

The package includes ten identical wireless audio receivers. Each is a small electronic board that adds Bluetooth to older speakers, amplifiers, headphones, or home audio systems. The module operates with Bluetooth 5.0 technology and is powered via a Micro USB connector. A phone, tablet, or laptop pairs with it just like a regular wireless speaker, and music is then played directly to the connected device. The board measures 30 x 30 mm, making it suitable for fitting into smaller enclosures or inside a speaker. This set is ideal for DIY enthusiasts who want to equip multiple devices at once, prepare materials for a club or workshop, and have enough spare modules.

Sound is output through the stereo 3.5 mm jack socket, to which you can connect headphones, active speakers, or the AUX input of an amplifier. Next to the socket, there are also soldering pads on the board for the left and right channels, allowing the output to be wired directly to the amplifier's input. Power is supplied via a standard cable with a Micro USB connector, which was previously used with most Android phones, so an older charger is also suitable. For permanent installation, there is a soldering pad BAT for an external lithium cell with a voltage of 3.7 V. The module operates with a power supply voltage of 3.7 to 5 V, and a blue LED indicates the connection.

  • Type – Bluetooth audio receiver and sound decoder in the form of a board
  • Bluetooth Version – 5.0
  • Supported Profiles – A2DP, AVCTP, AVDTP, AVRCP, and HFP
  • Range – 15 m line of sight
  • Power Supply – Micro USB 5 V or soldering pad for lithium cell 3.7 V
  • Power Supply Voltage – 3.7 to 5 V
  • Audio Output – stereo jack 3.5 mm and soldering pads for left and right channels
  • Signal-to-Noise Ratio – 90 dB
  • Dynamic Range – 91 dB
  • Total Harmonic Distortion THD+N – -70 dB
  • Crosstalk – -86 dB
  • Indication – blue LED in Bluetooth mode
  • Dimensions – 30 x 30 mm
  • Board Colour – black
  • Number of Pieces – 10 identical boards
  • Package Contents – 10 Bluetooth audio receiver boards of the same design without cables and casing

The module is supplied as a bare board without a casing, so protect it from moisture, dust, and short circuits during installation. It is advisable to secure the board using the mounting holes in the corners and ensure that the underside does not touch any metal parts. The antenna is printed directly on the board, so do not cover it with metal, as this may reduce the range. When soldering the power and audio wires, proceed carefully and observe the correct polarity.

A wireless receiver with a Micro USB connector in a pack of ten is a practical solution for getting music from a mobile device to several devices that do not have Bluetooth. With its compact size and power supply via Micro USB or from a battery, it is easily integrated into a home project. The output through the 3.5 mm jack can connect both headphones and an amplifier, and the soldering pads allow for a secure connection. The black board with a range of 15 m is suitable for repairing old radios, teaching in clubs, personal speakers, and other DIY projects.

Price incl. VAT €30.09