Home page Home page Hobbies & Garden Development boards Bluetooth 4.1 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power 3.7 to 5 V Red DIY
Bluetooth 4.1 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power 3.7 to 5 V Red DIY

Bluetooth 4.1 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power 3.7 to 5 V Red DIY

Five identical modules for receiving music from a phone to speakers and amplifiers. Powered by Micro USB or battery with stereo output via 3.5 mm jack. Full description
In stock
€16.55
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 4.1 Audio Receiver Module 5 pcs with Micro USB Connector Decoder Boards 30 x 30 mm Jack 3.5 mm Power 3.7 to 5 V Red DIY

The package includes five identical wireless audio receivers. Each is a small electronic board that adds Bluetooth to older speakers, amplifiers, headphones, or home audio systems. The module operates with Bluetooth 4.1 technology and is powered via the Micro USB connector. A phone, tablet, or laptop pairs with it just like a regular wireless speaker, and music is then played directly to the connected device. The board measures 30 x 30 mm, making it suitable for smaller enclosures or inside speakers. This set is ideal for DIY enthusiasts who want to revive multiple pieces of older technology at once or have spare modules on hand.

Sound is output through the stereo jack 3.5 mm socket, into which you can connect headphones, active speakers, or the AUX input of an amplifier. Next to the socket, there are also solder pads for the left and right channels on the board, allowing the output to be wired directly to the amplifier's input. Power is supplied via a standard cable with a Micro USB connector, which was previously used with most Android phones, so an older charger is also suitable. For permanent installation, a BAT solder pad is available for an external lithium cell with a voltage of 3.7 V. The module operates with a power supply voltage of 3.7 to 5 V, and a blue LED indicates the connection.

  • Type – Bluetooth audio receiver and audio decoder in the form of a board
  • Bluetooth Version – 4.1
  • Supported Profiles – A2DP, AVCTP, AVDTP, AVRCP, and HFP
  • Range – 15 m in direct line of sight
  • Power Supply – Micro USB 5 V or solder pad for lithium cell 3.7 V
  • Power Supply Voltage – 3.7 to 5 V
  • Audio Output – stereo jack 3.5 mm and solder pads for left and right channels
  • Signal-to-Noise Ratio – 90 dB
  • Dynamic Range – 91 dB
  • Total Harmonic Distortion THD+N – -70 dB
  • Crosstalk – -86 dB
  • Indication – blue LED in Bluetooth mode
  • Dimensions – 30 x 30 mm
  • Board Colour – red
  • Number of Pieces – 5 identical boards
  • Package Contents – 5 Bluetooth audio receiver boards of the same design without cables and casing

The module is supplied as a bare board without a casing, so protect it from moisture, dust, and short circuits during installation. It is advisable to secure the board using the mounting holes in the corners and ensure that the underside does not touch any metal parts. The antenna is printed directly on the board, so do not cover it with metal, as this may reduce the range. When soldering power and audio wires, proceed carefully and observe the correct polarity.

A wireless receiver with a Micro USB connector in a pack of five is a practical solution for getting music from a mobile device to several devices that do not have Bluetooth. With its compact dimensions and power supply via Micro USB or battery, it can be easily integrated into a home project. The output via the 3.5 mm jack can connect both headphones and an amplifier, and the solder pads allow for a secure connection. The red board with a range of 15 m is suitable for repairing old radios, teaching in clubs, building custom speakers, and other DIY projects.

Price incl. VAT €16.55