Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Photo, Audio-Video & TV Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players 1
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players 1
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players 2
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players 3
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players 4

Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players

Set of 10 black belts with a length when folded of 65 mm and a square cross-section of 1.2 mm. Restores the correct speed of turntables, tape recorders, and DVD drives. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Belts for Turntables and Tape Recorders 10 pcs Length when Folded 65 mm Square Cross-section 1.2 mm Rubber Black Replacement for Cassette Players and DVD

This set offers ten identical rubber belts with a length when folded of 65 mm, intended as a replacement for belts that have lost their elasticity. The belts have a square cross-section of 1.2 mm and are suitable for cassette tape recorders and players, DVD drives, and turntables with belt drive systems. An old belt can stretch over time, harden, or begin to slip, causing the device to play slower, the speed to fluctuate, or the mechanism to not turn at all. By replacing it with a new belt of the correct size, you can restore smooth operation without the need to purchase an entirely new mechanism. With ten pieces in one package, you'll have a spare belt on hand for future breakdowns.

The size is given as the length when folded. The belt is folded in half, laid flat without tension, and the distance from one bend to the other is measured. Before selecting a size, measure the original belt from your device in the same manner and compare its thickness as it is just as important as the length. The belts are made of flexible rubber, so once fitted, they will stretch between the motor pulley and the flywheel or platter. If the original belt is melted, sticky, or torn, it is better to measure the circumference of the pulleys with a piece of string and estimate the required length accordingly.

  • Type – replacement drive belt with square cross-section
  • Length when Folded – 65 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette tape recorders and players, DVD drives, turntables with belt drive systems
  • Package Contents – 10 pcs of rubber drive belts with a length when folded of 65 mm

Before replacing, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft of any remnants of the old rubber, preferably with a cloth dampened in isopropyl alcohol. Fit the new belt without twisting and check that it sits evenly in the grooves of the pulleys all around. After assembly, let the device run for a while and verify that the mechanism turns smoothly. Store spare pieces in a dry place, away from direct sunlight and heat sources, to keep the rubber as elastic as possible for as long as possible.

This set of ten rubber belts with a length when folded of 65 mm will help restore your home electronics with belt drive systems to working order. They are suitable for cassette tape recorders, DVD drives, and turntables where the original belt has ceased to reliably transmit motion from the motor. All pieces in the package are the same size and have a cross-section of 1.2 mm, so please check the dimensions of your original belt before ordering. Simply fold it, measure the length when folded, and compare it with the offered size. The remaining belts can then be stored as a supply for future repairs.

Price incl. VAT €5.63