Home page Home page Photo, Audio-Video & TV Belts for Cassette Tape Recorder 10 pcs Length when Folded 40 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD and Turntable
Belts for Cassette Tape Recorder 10 pcs Length when Folded 40 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD and Turntable

Belts for Cassette Tape Recorder 10 pcs Length when Folded 40 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD and Turntable

Pack of 10 rubber drive belts with a length when folded of 40 mm and a square cross-section. Replacement for cassette tape recorders, DVD drives and turntables. Full description
In stock
€5.63
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Belts for Cassette Tape Recorder 10 pcs Length when Folded 40 mm Square Cross-section 1.2 mm Rubber Black Replacement for DVD and Turntable

This set offers ten identical rubber drive belts with a length when folded of 40 mm, which will replace a hardened, slack or broken belt. The belts have a square cross-section of 1.2 mm and are designed for cassette tape recorders and players, DVD drives, and turntables with belt drive systems. An old belt can wear out, harden, or begin to slip over time, causing the device to play slower, with fluctuating speeds, or not spin at all. By replacing it with a new belt of the correct size, you can restore smooth operation without the need to purchase an entirely new mechanism. There are ten belts in the pack, so you will have additional pieces left over for future repairs.

The size is indicated as the length when folded. The belt is folded in half, laid flat without tension, and the distance from one bend to the other is measured. Before selecting a size, measure the original belt from your device in the same way and also compare its thickness, as this is just as important as the length. The belts are made from flexible rubber, so once fitted, they will stretch between the motor pulley and the flywheel or platter. If the original belt is melted, sticky, or broken, it is better to measure the circumference of the pulleys with a piece of string and estimate the required length accordingly.

  • Type – replacement drive belt with square cross-section
  • Length when Folded – 40 mm
  • Cross-section – square, width 1.2 mm
  • Material – rubber
  • Colour – black
  • Usage – cassette tape recorders and players, DVD drives, turntables with belt drive systems
  • Contents of the Pack – 10 pcs of rubber drive belts with a length when folded of 40 mm

Before replacing, disconnect the device from the power supply and remove the mechanism cover. Carefully remove the old belt and clean the pulleys and motor shaft of any remnants of the old rubber, preferably with a cloth dampened with isopropyl alcohol. Fit the new belt without twisting and check that it sits in the grooves of the pulleys all around. After assembly, let the device run for a while and verify that the mechanism spins evenly. Store spare pieces in a dry place, away from direct sunlight and heat sources, to keep the rubber as flexible as possible for as long as possible.

Ten rubber belts with a length when folded of 40 mm will help you repair home electronics with belt drive systems. They are suitable for cassette tape recorders, DVD drives, and turntables where the original belt has stopped reliably transmitting motion from the motor. All pieces in the pack are of the same size and have a cross-section of 1.2 mm, so please check the dimensions of the original belt before ordering. Simply fold it, measure the length when folded, and compare it with the offered size. The remaining belts can then be stored as a supply for future repairs.

Price incl. VAT €5.63