Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Assembled Module Digital FM Stereo Radio 87-108 MHz Four-Digit LED Display Automatic Tuning Powered by USB-C or 2x AA Headphones
Assembled Module Digital FM Stereo Radio 87-108 MHz Four-Digit LED Display Automatic Tuning Powered by USB-C or 2x AA Headphones

Assembled Module Digital FM Stereo Radio 87-108 MHz Four-Digit LED Display Automatic Tuning Powered by USB-C or 2x AA Headphones

Ready-made FM receiver with stereo sound for headphones, memory for 64 stations, and button control. Powered by USB-C cable or two AA batteries. Full description
In stock
€30.96
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Assembled Module Digital FM Stereo Radio 87-108 MHz Four-Digit LED Display Automatic Tuning Powered by USB-C or 2x AA Headphones

This compact module is a ready-made digital FM radio that receives stations in the 87 to 108 MHz band and plays them in stereo through headphones. The board is already assembled and soldered, so you just need to power it and connect the headphones. The tuned frequency and other information are displayed on a four-digit red LED display. The radio can automatically search for and store stations in memory for 64 presets. The module is suitable for DIY enthusiasts, for school electronics education, or as a small personal radio.

The board is mounted on a plastic holder for two AA batteries, forming a single solid unit with dimensions of 6 x 3.2 x 2.06 cm. In addition to batteries, the module can also be powered via a USB-C connector with a voltage of 5 V, for example, from a phone charger or a power bank. Five buttons below the display are used for power, tuning, and volume control.

  • Type – assembled module digital FM stereo radio
  • Frequency Range – 87 to 108 MHz
  • Display – four-digit red LED display
  • Control – 5 buttons POWER, PR-, PR+, V- and V+
  • Tuning – automatic station search and manual frequency stepping
  • Station Memory – 64 positions (0 to 63)
  • Volume – 16 levels (0 to 15)
  • Output Power – 20 mW to headphones
  • Signal-to-Noise Ratio – 54 dB
  • Stereo Separation – 26 dB
  • Adjacent Channel Suppression – 34 dB
  • Output – 3.5 mm connector for stereo headphones
  • Power Supply – USB-C 5 V or 2 AA 1.5 V batteries (batteries not included)
  • Auto Power Off – after 59 minutes without button press
  • Dimensions – 6 x 3.2 x 2.06 cm
  • Package Contents – assembled and soldered radio module with holder for 2 AA batteries

Insert the batteries or connect the USB-C cable, plug in the headphones, and press the POWER button. If you hold the power button for about two seconds, the radio will scan the entire band and automatically save the found stations. Use the PR- and PR+ buttons to change the frequency, and holding them will quickly tune to the nearest station. Use the V- and V+ buttons to adjust the volume. The best reception is usually in higher floors or open spaces. Protect the module from moisture and from contact with metal objects with exposed connections.

The assembled module digital FM stereo radio combines simple operation with practical features, such as station memory and automatic power off after 59 minutes of inactivity, which saves batteries. With the stereo output to headphones, you hear the left and right channels separately. DIY enthusiasts can embed the module into their own enclosure or use it as a basis for other projects, while teachers can use it as a demonstration of a modern receiver. Dual power supply via USB-C or AA batteries allows the radio to be used at home or on the go. Batteries, cable, and headphones are not included.

Price incl. VAT €30.96