Home page Home page Photo, Audio-Video & TV Radios Assembled FM Radio 87.5-108 MHz with LED Display Amplifier 3 to 5 W Antenna 30 cm Power Supply USB-C 5 V or 3x AA Transparent Acrylic Case
Assembled FM Radio 87.5-108 MHz with LED Display Amplifier 3 to 5 W Antenna 30 cm Power Supply USB-C 5 V or 3x AA Transparent Acrylic Case

Assembled FM Radio 87.5-108 MHz with LED Display Amplifier 3 to 5 W Antenna 30 cm Power Supply USB-C 5 V or 3x AA Transparent Acrylic Case

Ready-made FM receiver without soldering featuring the RDA5807M chip and AXS2031 amplifier. The frequency is displayed on the LED screen and plays through the speaker as well as headphones. Full description
In stock
€39.26
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Assembled FM Radio 87.5-108 MHz with LED Display Amplifier 3 to 5 W Antenna 30 cm Power Supply USB-C 5 V or 3x AA Transparent Acrylic Case

The assembled FM radio is a ready-made radio receiver in a transparent case that you can start using immediately after unpacking without any soldering. The reception of stations is handled by the RDA5807M chip, covering the entire FM band in the range of 87.5 to 108 MHz. The tuned frequency or current volume level is displayed on a four-digit LED screen. The radio is controlled by the STC8G1K08 microcontroller, and the sound comes from a 4 Ω 3 W speaker. Thanks to the visible electronics, it is an interesting addition to your desk and a demonstration of how a radio works inside.

The sound is provided by a digital AXS2031 amplifier with an output power of 3 to 5 W, which, according to the manufacturer, plays without distortion even at lower voltages. The power supply for the electronics is monitored by a 3.3 V buck-boost module, ensuring that the display and microcontroller operate reliably even with an input voltage ranging from 2.5 to 5.5 V. The radio can be powered via a USB-C connector from a 5 V adapter or from a power bank, or from three AA batteries. Both power supply methods cannot be used simultaneously. The omnidirectional telescopic antenna, measuring 30 cm, can be rotated in any direction to improve the reception of weaker stations.

  • Type – assembled FM radio in an acrylic case
  • Receiving Chip – RDA5807M
  • Microcontroller – STC8G1K08
  • Amplifier – AXS2031 with output power of 3 to 5 W
  • Frequency Range – 87.5 to 108 MHz (FM band)
  • Power Supply – USB-C 5 V or 3 AA batteries (4.5 V), batteries not included
  • Display – four-digit LED display for frequency and volume
  • Speaker – 4 Ω 3 W
  • Antenna – omnidirectional telescopic antenna 30 cm
  • Controls – volume and tuning buttons, power switch, gain adjustment trimmer
  • Output – 3.5 mm jack for headphones or amplifier
  • Package Contents – assembled FM radio in a transparent acrylic case with speaker, holder for 3 AA batteries, and telescopic antenna

Anyone can manage the controls. A short press on the tuning buttons moves the frequency in 0.1 MHz increments, while a long press initiates automatic station scanning. Two additional buttons adjust the volume, and a blue indicator shows that the radio is on. You can connect headphones or an external amplifier via the 3.5 mm jack output. Protect the radio from moisture and dust, wipe the case with a dry soft cloth, and remove the batteries during prolonged periods of non-use.

This assembled radio offers simple listening to FM stations without the need to solder or adjust anything. It is suitable for workshops, desks, bedrooms, and as a gift for technology enthusiasts. Two power supply options via USB-C or AA batteries allow the radio to be used at home or away from a power outlet. The electronics remain clearly visible under the transparent acrylic case, making the radio a useful demonstration for educational purposes. The display, buttons, and rotating antenna make this device a practical companion for everyday listening.

Price incl. VAT €39.26