Home page Home page Hobbies & Garden Measuring Instruments Voltage Testers ANENG B20 Digital Voltage Tester with Flat and Cross Bit Screwdriver LCD Display Non-Contact Detection 30–1000 V
ANENG B20 Digital Voltage Tester with Flat and Cross Bit Screwdriver LCD Display Non-Contact Detection 30–1000 V

ANENG B20 Digital Voltage Tester with Flat and Cross Bit Screwdriver LCD Display Non-Contact Detection 30–1000 V

Measure AC voltage by touch or without contact and tighten screws at the same time. The coloured display distinguishes between phase and neutral wire, and an audible signal indicates continuity. Full description
In stock
Colour:
€22.66
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ANENG B20 Digital Voltage Tester with Flat and Cross Bit Screwdriver LCD Display Non-Contact Detection 30–1000 V

The ANENG B20 digital voltage tester combines a measuring device and screwdriver into one compact tool that comfortably fits in your pocket. It measures AC voltage contactlessly in the range of 11–450 V AC and detects electric fields of voltage from 30–1000 V without touching the conductor. The measured value is displayed on a backlit two-colour LCD screen, which turns red for high voltage and remains green for low voltage. An audible signal adds an extra warning, allowing you to notice changes without looking at the display. This tester is suitable for electricians, maintenance workers, and DIY enthusiasts who want to have basic electrical checks always at hand.

The body includes a double-sided bit with a flat and cross head. Simply pull out the bit, turn it around, and insert it back, allowing you to switch between both types of screws in no time without needing to carry additional tools. The metal head of the bit also touches the measured conductor or contact in the socket. In non-contact mode (NCV), simply bring the tip close to the socket or cable, and the tester will show the strength of the electric field on a three-level scale, with the audible signal getting louder the closer you are to the voltage source. The phase and neutral wire distinction function works simply: when the tip is inserted into the socket, the display lights up red for phase and emits a beep, while it remains green for the neutral wire.

  • Model – ANENG B20
  • Contact Measurement – AC voltage 11–450 V
  • Non-Contact Detection – 30–1000 V AC
  • Frequency – 50–60 Hz
  • Indication – change of display backlight colour and audible signal
  • Additional Functions – continuity testing, phase and neutral wire distinction, low battery indication
  • Bit – double-sided flat and cross, removable, length 7.2 cm, diameter 4.4 mm
  • Lighting – white LED flashlight
  • Automatic Shutdown – after 3 minutes of inactivity
  • Power Supply – 2 AAA 1.5 V batteries (not included)
  • Material – ABS plastic
  • Dimensions – 16.1 x 3.12 x 2.62 cm including bit
  • Operating Temperature – 0–40 °C
  • Package Contents – voltage tester with double-sided bit, user manual, box

When measuring, keep your finger on the touch surface of the tester; otherwise, the result may not be accurate. To activate the continuity test, briefly press the S button: when the display shows zero and a buzzer sounds, the conductor is fine; the message oL without sound indicates a break. A long press of the S button will turn on the flashlight, which is helpful in a dark distribution board or behind furniture. There is a clip on the side that allows you to attach the tester to your shirt pocket or work trousers. When the display shows the message LO, replace both batteries in the compartment, which has a removable conductive connector.

The ANENG B20 tester replaces two separate tools and saves space in your tool bag. You can quickly check if there is voltage in the socket, switch, or cable, find the phase, and check for a broken conductor. Thanks to the non-contact detection NCV, you can search for voltage without stripping the cable. The compact ABS plastic body with a removable bit fits in your pocket, and the backlit display is readable even in the dark. After 3 minutes of inactivity, the device automatically shuts off to conserve battery.

Price incl. VAT €22.66