Home page Home page Hobbies & Garden Measuring Instruments Voltage Testers ANENG B19 Voltage Tester with Flat Screwdriver Non-Contact Detection 30–1000 V LCD Display Length 19 cm Red for Household Use
ANENG B19 Voltage Tester with Flat Screwdriver Non-Contact Detection 30–1000 V LCD Display Length 19 cm Red for Household Use

ANENG B19 Voltage Tester with Flat Screwdriver Non-Contact Detection 30–1000 V LCD Display Length 19 cm Red for Household Use

Digital tester with a flat screwdriver tip. Non-contact voltage detection, distinguishes live from neutral, and alerts with a red display and sound signal. Full description
In stock
€18.30
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ANENG B19 Voltage Tester with Flat Screwdriver Non-Contact Detection 30–1000 V LCD Display Length 19 cm Red for Household Use

The ANENG B19 voltage tester with a flat tip is a digital measuring pen that also serves as an electrician's screwdriver. Without touching the conductor, it detects alternating voltage in the range of 30–1000 V AC, allowing you to easily verify whether a cable, socket, or switch is live. When the tip is in direct contact with the conductor, it measures voltage from 11–450 V AC and displays the value on a backlit two-colour LCD screen. Green backlighting indicates a weak electric field, while red backlighting with a sound buzzer indicates a strong field. You can use it at home, in the workshop, at the cottage, and for routine repairs and checks of electrical installations in flats or garages.

Distinguishing between the live and neutral wires is quick: touch the touch button with your finger and insert the tip into the socket. The neutral wire will display a green screen without sound, while the live wire will show a red screen and beep. The three-level scale on the display approximately indicates the strength of the electric field. The flat tip, which is 4 mm wide and 24 mm long, can loosen and tighten screws with slots in terminals, boxes, or sockets. The tester can also locate breaks in wiring and verify whether the appliance switch correctly disconnects the circuit.

  • Model – ANENG B19
  • Tip – flat screwdriver measuring 4 mm in width and 24 mm in length
  • Non-Contact Detection – 30–1000 V AC
  • Contact Measurement – 11–450 V AC
  • Frequency – 50–60 Hz
  • Indication – colour backlighting of the display and sound buzzer
  • Display – backlit two-colour LCD with a three-level scale
  • Functions – phase and neutral identification, break detection in wiring, and switch testing
  • Control – touch button and power button with function switching
  • Auto Shut-Off – after 3 minutes of inactivity
  • Power Supply – 1.5 V battery, sold separately
  • Total Length – 19 cm
  • Handle – non-slip with an insulating rubber coating
  • Package Contents – ANENG B19 voltage tester with flat tip, user manual, and cardboard box

You will appreciate the tester when checking electronic components, repairing fans and air conditioning units, maintaining distribution boards, and locating faults in automotive electrical installations. The battery is inserted under the removable cover at the back of the handle. Keep the tip clean and dry, store the tester in the box after use to prevent scratching the display, and remove the battery if not used for an extended period.

The ANENG B19 with a flat tip saves space in your tool bag as it replaces both a screwdriver and a simple voltage tester. The colour backlighting and sound signalling provide clear feedback even in dark or noisy environments. The flat tip is suitable for screws with slots in switches, sockets, and terminal blocks. Battery conservation is ensured by automatic shut-off after 3 minutes, and a secure grip is provided by the insulated rubber handle with a non-slip surface.

Price incl. VAT €18.30