Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Aerators for Tap M24 2 pcs External Thread 24 mm Chrome-Plated Brass with Removable Insert and Mesh For Basin and Sink
Aerators for Tap M24 2 pcs External Thread 24 mm Chrome-Plated Brass with Removable Insert and Mesh For Basin and Sink

Aerators for Tap M24 2 pcs External Thread 24 mm Chrome-Plated Brass with Removable Insert and Mesh For Basin and Sink

Two identical M24 aerators made of chrome-plated brass for replacement on both basin and sink. The insert with mesh softens the water flow and reduces splashing. Full description
In stock
€9.13
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Aerators for Tap M24 2 pcs External Thread 24 mm Chrome-Plated Brass with Removable Insert and Mesh For Basin and Sink

The package contains 2 individual aerators with the same external thread M24, allowing you to replace the aerator on both the basin and kitchen sink at the same time, or you can keep one as a spare. The casing of each aerator is made of chrome-plated brass and inside there is a removable insert with mesh. The insert aerates the water flow, softens it, and reduces splashing. The aerators fit taps with an internal thread diameter of approximately 23 to 23.5 mm. Suitable for both bathroom and kitchen.

Over time, the original aerator can become clogged with limescale and small debris from the pipes, causing the water to flow unevenly and splash to the sides. The twin pack is practical for a smaller flat with one bathroom and kitchen, where it's sufficient to replace two aerators of the same size. Before ordering, unscrew the original aerator and measure its external diameter. If it measures between 23.5 and 24 mm, these aerators will fit. Each piece includes a rubber seal to help prevent water leakage around the thread.

  • Type – replacement aerators for tap
  • Number of pieces – 2 identical aerators
  • Thread – external M24, diameter 24 mm
  • Suitable tap – outlet with an internal thread diameter of approximately 23 to 23.5 mm
  • Material of casing – brass with chrome finish
  • Insert – removable, made of ABS plastic with mesh
  • Usage – basin, kitchen, and sink taps, not intended for shower heads
  • Colour – silver
  • Contents of package – 2 M24 aerators, each with insert, mesh, and rubber seal

You can carry out the replacement yourself without a plumber. Unscrew the old aerator, wipe the thread on the tap, and screw on the new aerator by hand until tight. For regular maintenance, simply unscrew the aerator from time to time, remove the insert, and rinse it under running water. You can dissolve any limescale by briefly soaking the insert in a solution of vinegar or citric acid. When installing or cleaning, do not use excessive force or pliers without protection to avoid scratching the chrome surface. Firmly tightened aerators should be wrapped in a cloth and loosened carefully. Regular cleaning of the insert will extend the time during which the water flow remains even and splash-free.

Two replacement M24 aerators are a simple solution to restore an even water flow on two taps in the home. The chrome-plated brass casings visually match standard shiny taps, and the removable insert with mesh is easy to clean. After replacement, the water flows softer and splashes less onto surrounding surfaces. Both pieces have the same M24 thread, making them interchangeable. You can use the second aerator immediately or keep it as a spare in case the first one becomes clogged. Just check the size of the thread on your tap before ordering.

Price incl. VAT €9.13