Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Adjustable Power Supply Kit LM317 for Soldering Output 1.25 to 12 V 1 A Input AC and DC Potentiometer and Heat Sink Soldering Kit for Education
Adjustable Power Supply Kit LM317 for Soldering Output 1.25 to 12 V 1 A Input AC and DC Potentiometer and Heat Sink Soldering Kit for Education

Adjustable Power Supply Kit LM317 for Soldering Output 1.25 to 12 V 1 A Input AC and DC Potentiometer and Heat Sink Soldering Kit for Education

Soldering kit for an adjustable voltage regulator with the LM317 circuit and rectifier. Ideal for soldering training and powering your own electronic circuits. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Adjustable Power Supply Kit LM317 for Soldering Output 1.25 to 12 V 1 A Input AC and DC Potentiometer and Heat Sink Soldering Kit for Education

The adjustable power supply kit is a soldering kit from which you can assemble a smoothly adjustable voltage regulator using the popular LM317 circuit. The output voltage can be set using a rotary potentiometer in the range of 1.25 to 12 V, and the power supply can deliver a current of up to 1 A. You can connect an AC voltage of up to 17 V or a DC voltage of up to 25 V at the input, as the board contains a diode rectifier. This kit is suitable for beginners learning to solder as well as for hobbyists who need a simple laboratory power supply for their projects. The completed module is suitable for powering prototypes, LEDs, small devices, and other electronic circuits during experiments on the workbench.

The LM317 circuit is one of the most widely used adjustable voltage regulators. To set the output voltage, it requires only two external resistors, and its linearity and stability under load changes are better than those of standard fixed regulators. The circuit has built-in overload protection and safe operating area protection. Diodes D5 and D6 on the board protect the regulator, the output voltage is adjusted by turning potentiometer RP, and the heat sink dissipates heat from the regulator.

  • Type – adjustable voltage supply kit for soldering
  • Regulator – LM317
  • Input Voltage – AC up to 17 V or DC up to 25 V
  • Output Voltage – 1.25 to 12 V continuously adjustable
  • Output Current – 1 A
  • Adjustment – rotary potentiometer
  • Connection – screw terminals for input and output
  • Protection – built-in overload protection and protective diodes
  • Board Size – 60 x 32 mm
  • Model – ZY-KT-154
  • Package Contents – PCB and a set of components for soldering including the LM317 regulator and heat sink, potentiometer, terminals, diodes, and capacitors

The kit is supplied as loose components that need to be soldered and assembled. When assembling, pay attention to the polarity of the diodes and electrolytic capacitors, to the longer lead of the LED as the positive pole, and to the correct resistor values. Screw the regulator to the heat sink. After completion, check the connections and only then connect the power supply within the permitted range. Set the output voltage using the potentiometer and verify it with a multimeter before connecting a load to the module. Batteries or power adapters are not included in the package.

The small board measuring 60 x 32 mm easily fits into a box or on a workbench, and thanks to the terminals, you can quickly connect it to power and to the load. The kit teaches the basics of rectification and voltage stabilization and working with one of the most commonly used circuits in electronics. It is suitable for electronics clubs, technical education, home workshops, and as a gift for budding electronics enthusiasts. You will need a micro soldering iron, solder, and basic skills to assemble it. The finished power supply will then serve in further experiments and projects.

Price incl. VAT €4.76