Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Adapter for Tap from Internal Thread M26 to External Thread M22 Chrome-Plated Brass Outlet Adapter for Aerator Extender and Filter
Adapter for Tap from Internal Thread M26 to External Thread M22 Chrome-Plated Brass Outlet Adapter for Aerator Extender and Filter

Adapter for Tap from Internal Thread M26 to External Thread M22 Chrome-Plated Brass Outlet Adapter for Aerator Extender and Filter

Brass adapter screws onto an outlet with an external thread M26 and offers an external thread M22 for a standard aerator, swivel attachment or water filter. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Adapter for Tap from Internal Thread M26 to External Thread M22 Chrome-Plated Brass Outlet Adapter for Aerator Extender and Filter

The tap adapter is designed for taps that have a thread on the surface of the outlet and is fitted with a cover with an aerator. On the wider side, it has a internal thread M26 and on the narrower side, an external thread M22, both with a fine pitch. After removing the original cover, you can screw the adapter directly onto the outlet with the external thread M26. You can then connect the aerator, swivel attachment, or filter with an internal thread M22 to its narrower end. You can easily carry out the replacement yourself in the kitchen or bathroom.

The adapter is made of brass and has a chrome-plated surface, which is shiny and smooth, matching the appearance of standard chrome taps. The wider cylindrical part with the internal thread M26 smoothly transitions into the narrower external thread M22. The part is low and compact, so it only extends the outlet by a few millimetres and does not disrupt the appearance of the tap. Brass has been used for tap adapters for a long time, as it withstands both cold and hot water well. Accessories for outlets with an external thread M26 are harder to find than for the more common thread M22. Thus, the adapter gives you access to a wide range of aerators, extenders, and filters without the need to replace the entire tap.

  • Type – threaded adapter for tap
  • First Thread – internal M26, fine thread, diameter 26 mm
  • Second Thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting an aerator, attachment, or filter with an internal thread M22 to an outlet with an external thread M26
  • Suitable for – kitchen and bathroom taps with a thread on the surface of the outlet
  • Package Contents – 1 threaded adapter M26 to M22

Before ordering the adapter, check what thread your tap outlet has. Remove the cover with the aerator and measure the external diameter of the thread at the end of the outlet with a caliper. If you measure approximately 26 mm and the thread is on the outside, the adapter will fit your tap. Insert a seal into the adapter and tighten it evenly and gently to avoid damaging the threads. Wipe the chrome-plated surface with a soft damp cloth and a mild non-abrasive cleaner. You can dissolve limescale deposits with a weak vinegar solution and then rinse the part with clean water. Keep the original cover in case you want to revert to it.

The adapter from internal thread M26 to external thread M22 connects the tap with a thread on the surface of the outlet to standard accessories. The brass with chrome finish looks neat and matches the tap. You will find it useful when installing an aerator, swivel extender, or water filter. Just verify that the outlet has an external thread M26. Then screw on the adapter and connect your chosen attachment to its M22 thread.

Price incl. VAT €12.18