Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Adapter for Tap from Internal Thread M16 to External Thread M22 Chrome-Plated Brass Adapter for Thin Tap Outlet for Aerator and Filter
Adapter for Tap from Internal Thread M16 to External Thread M22 Chrome-Plated Brass Adapter for Thin Tap Outlet for Aerator and Filter

Adapter for Tap from Internal Thread M16 to External Thread M22 Chrome-Plated Brass Adapter for Thin Tap Outlet for Aerator and Filter

Brass adapter for thin outlets with external thread M16. Creates external thread M22 on the tap for an aerator, swivel attachment, or water filter. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Adapter for Tap from Internal Thread M16 to External Thread M22 Chrome-Plated Brass Adapter for Thin Tap Outlet for Aerator and Filter

This tap adapter is suitable for taps with a very thin outlet that has an external thread on its surface. On the narrower side, it has a internal thread M16 and on the wider side, it has a external thread M22, both with a fine pitch. You screw the adapter onto the outlet with an external thread M16 instead of the original cap. On its wider end, you can then connect an aerator, swivel extension, or filter with an internal thread M22. You can install it yourself in just a few minutes without needing a plumber.

The part is made of brass and has a chrome-plated surface, shiny and smooth, so it matches standard chrome taps. The upper smooth cylinder with an internal thread M16 transitions into a wider lower part with an external thread M22. The adapter is small and compact and will only extend the outlet by a few millimetres. Brass has been used for tap adapters for a long time as it withstands both cold and hot water well. The M16 thread is among the smallest sizes of outlets, and accessories for it are very difficult to find. Thanks to the adapter, you can use standard attachments with thread M22 even on a thin tap without needing to replace the entire tap.

  • Type – threaded adapter for tap
  • First Thread – internal M16, fine thread, diameter 16 mm
  • Second Thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting aerator, extension, or filter with internal thread M22 to outlet with external thread M16
  • Suitable for – smaller basin taps and taps with thin outlets and surface thread
  • Contents of Package – 1 threaded adapter M16 to M22

Before ordering, please check the size of the thread on the outlet. Remove the original cap and measure the external diameter of the thread at the end of the outlet with a caliper. If you measure approximately 16 mm and the thread is on the outside, the adapter is suitable for the tap. Insert a seal into the adapter and tighten it carefully to avoid damaging the fine threads. Clean the chrome-plated surface with a soft damp cloth and a gentle non-abrasive cleaner. You can remove limescale with a weak solution of vinegar or citric acid and then rinse the part with clean water. Keep the original cap for possible later use.

The adapter from internal thread M16 to external thread M22 makes standard accessories available even for taps with thin outlets. The brass with chrome finish looks neat and matches the tap. You will use it when installing an aerator, swivel attachment, or water filter. Just ensure that the outlet has an external thread M16. Then screw on the adapter and connect your chosen attachment to its M22 thread.

Price incl. VAT €12.18