Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Adapter for Tap from Internal Thread G1/2 to External Thread M22 Chrome-Plated Brass Adapter for Aerator Extender and Filter
Adapter for Tap from Internal Thread G1/2 to External Thread M22 Chrome-Plated Brass Adapter for Aerator Extender and Filter

Adapter for Tap from Internal Thread G1/2 to External Thread M22 Chrome-Plated Brass Adapter for Aerator Extender and Filter

Brass adapter for taps with external thread G1/2. You can screw an aerator, extender or water filter onto its external thread M22. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Adapter for Tap from Internal Thread G1/2 to External Thread M22 Chrome-Plated Brass Adapter for Aerator Extender and Filter

The tap adapter is designed for outlets and valves that end with a pipe thread G1/2. On one side, it has a female thread G1/2 with a diameter of approximately 20 mm, and on the other side, a male thread M22 with fine pitch. The adapter screws onto a tap with an external thread G1/2, and you can connect an aerator, swivel extender, filter, or other accessories with an internal thread M22 to its other end. It is useful in the kitchen, bathroom, and utility room. Installation is quick, simple, and can be done by yourself.

The adapter is made of brass with a chrome-plated surface, which is shiny and matches well with standard taps. The bottom part consists of a smooth cylindrical casing, while the top part features a fine external thread M22. Brass is traditionally used in tap adapters and is suitable for both cold and hot water. The G1/2 thread is commonly found on taps in basements, garages, utility rooms, and on some wall valves, where standard accessories with M22 threads do not fit without an adapter. After screwing on the adapter, you can attach an aerator that will calm the flow and reduce splashing, a swivel extender for easier dishwashing, or a water filter. The adapter is compact and will only extend the outlet by a few millimetres.

  • Type – thread adapter for taps
  • First thread – internal G1/2, coarser pipe thread, diameter approximately 20 mm
  • Second thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting an aerator, extender, or filter with internal thread M22 to a tap with external thread G1/2
  • Suitable for – taps, valves, and outlets with G1/2 thread
  • Package contents – 1 thread adapter G1/2 to M22

Before ordering the adapter, measure the thread on your tap. Use a caliper to determine the external diameter of the thread on the outlet. If you measure approximately 20 mm and the thread is on the outer side, it is a G1/2 thread, and the adapter will fit. Insert a seal into the internal thread of the adapter to keep the connection tight, and tighten it carefully. The surface only needs to be wiped with a damp cloth and a gentle non-abrasive cleaner to maintain its shine.

The adapter from internal thread G1/2 to external thread M22 is a practical solution when you want to attach standard accessories to a tap with a pipe thread. Brass with a chrome-plated finish looks good and matches other plumbing fixtures. You will use it when installing an aerator, swivel extender, or water filter. Just ensure that the tap has an external thread G1/2 before purchasing. You can then screw on the adapter and connect your chosen accessory to its M22 thread.

Price incl. VAT €12.18