Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Adapter for Small Tap from Internal Thread M18 to External Thread M22 Chrome-Plated Brass Adapter for Narrow Outlet for Aerator Attachment
Adapter for Small Tap from Internal Thread M18 to External Thread M22 Chrome-Plated Brass Adapter for Narrow Outlet for Aerator Attachment

Adapter for Small Tap from Internal Thread M18 to External Thread M22 Chrome-Plated Brass Adapter for Narrow Outlet for Aerator Attachment

Adapter for narrow outlets with external thread M18. Once screwed on, you will obtain an external thread M22 for a standard aerator, swivel extension or water filter. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Adapter for Small Tap from Internal Thread M18 to External Thread M22 Chrome-Plated Brass Adapter for Narrow Outlet for Aerator Attachment

The tap adapter is designed for taps with a narrow outlet that has an external thread. At the narrower end, it has a female thread M18 and at the wider end, a male thread M22, both with fine pitch. You screw the adapter onto the outlet with external thread M18 in place of the original cap, and on its wider end, you connect accessories with internal thread M22. Narrow outlets are mainly found on smaller basin taps and pillar taps. The replacement takes only a moment and does not require special tools.

The adapter is made of brass with a chrome finish, which is shiny and matches most standard taps. The narrower upper part with internal thread M18 widens downwards to external thread M22. The part is small and compact, therefore it only extends the outlet by a few millimetres. Brass is used for tap adapters due to its resistance to both cold and hot water. Accessories for taps with small threads can be difficult to find, while attachments with thread M22 are widely available. The adapter allows you to use a water-saving aerator, swivel extension or water filter even on a small tap without having to change the entire tap.

  • Type – threaded adapter for tap
  • First thread – internal M18, fine thread, diameter 18 mm
  • Second thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Finish – chrome, shiny
  • Usage – connecting an aerator, extension or filter with internal thread M22 to an outlet with external thread M18
  • Suitable for – basin taps and taps with narrow outlets and surface thread
  • Package contents – 1 threaded adapter M18 to M22

Before purchasing, measure the thread on the tap outlet. Remove the cap with the aerator and use a caliper to determine the external diameter of the thread. If you measure approximately 18 mm and the thread is on the surface of the outlet, the adapter is suitable for your tap. Insert a seal into the adapter and tighten it gently to avoid damaging the threads. Wipe the surface with a damp cloth and a mild non-abrasive cleaning agent. Limescale can be gently removed with a solution of citric acid, after which rinse the adapter with clean water. Keep the original cap in case you wish to revert to it later.

The adapter from internal thread M18 to external thread M22 expands the selection of accessories even for taps with narrow outlets. It is made of brass and thanks to the chrome finish, it looks neat. You will use it for an aerator, swivel extension or water filter. Just verify that the outlet has an external thread M18. Then screw on the adapter and connect your chosen attachment to its thread M22.

Price incl. VAT €12.62