Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits 6.2 mm HSS M35 Cobalt Step Drill Bit with Seven Steps Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel
6.2 mm HSS M35 Cobalt Step Drill Bit with Seven Steps Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

6.2 mm HSS M35 Cobalt Step Drill Bit with Seven Steps Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

6.2 mm metal drill bit with a seven-step cobalt HSS M35 tip. Spiral length 70 mm and total length 102 mm for drilling into steel and stainless steel. Full description
In stock
€10.44
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
6.2 mm HSS M35 Cobalt Step Drill Bit with Seven Steps Total Length 102 mm Cylindrical Shank For Steel and Stainless Steel

The cobalt step drill bit with a diameter of 6.2 mm is a spiral drill designed for drilling into metal. It is made of high-speed steel HSS M35 with cobalt, suitable for drilling iron, structural steel, and stainless steel. The tip of the drill consists of seven small steps that smoothly transition to the full diameter. The spiral flute removes chips from the hole while drilling. The diameter of 6.2 mm is suitable where a hole slightly larger than six millimetres is needed.

The total length of the drill is 102 mm and the working part with the spiral measures 70 mm. The drill can handle sheets, strips, angles, and thicker metal profiles. The cylindrical shank can be clamped into the chuck of a cordless drill, handheld electric drill, or pillar drill. Detailed images capture the stepped tip and the shape of the spiral flute.

Compared to a standard spiral drill, this drill features seven steps at the tip with gradually increasing diameters. The narrowest step creates a small hole in the metal, and the subsequent steps gradually enlarge it. The full diameter of 6.2 mm penetrates the material only after passing through all the steps. The hole is created in a single working step, eliminating the need for pre-drilling with a smaller drill. The traces of the individual steps in the wall of the hole are shown in the product photographs.

  • Type – step drill with a spiral tip
  • Diameter – 6.2 mm
  • Working Length – 70 mm
  • Total Length – 102 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Tip – seven steps gradually transitioning to full diameter
  • Shank – cylindrical
  • Usage – drilling into iron, steel, and stainless steel
  • Package Contents – 1 piece of 6.2 mm step drill bit

When working with steel and stainless steel, we recommend using cutting oil or coolant to protect the tip from overheating. Adjust the speed according to the diameter of the drill bit and the type of metal, and guide the drill perpendicular to the surface with even pressure. After use, clean the drill bit of chips and oil, and store it so that the tip does not touch other metal tools. The drill bit is useful for assembling metal structures, holders, and brackets, for drilling holes for rivets and screws into sheets, or for repairing metal furniture and garden equipment. It is also suitable for modifying profiles and strips in a home workshop. Before starting to drill, mark the centre of the hole with a centre punch to prevent the tip from slipping on smooth metal.

The 6.2 mm step drill bit is a practical addition to the workshop and garage for working with metal. The high-speed steel M35 with cobalt drills even into stainless steel. The seven steps at the tip expand the hole step by step up to the full diameter. The cylindrical shank fits into standard drills. The package contains one drill bit with a diameter of 6.2 mm.

Price incl. VAT €10.44