Home page Home page Hobbies & Garden Development boards 433 MHz Transmitter and Receiver Radio Module Set of Two Boards Superregenerative Reception and AM Modulation for Wireless Data Transmission
433 MHz Transmitter and Receiver Radio Module Set of Two Boards Superregenerative Reception and AM Modulation for Wireless Data Transmission

433 MHz Transmitter and Receiver Radio Module Set of Two Boards Superregenerative Reception and AM Modulation for Wireless Data Transmission

Pair of modules for one-way radio signal transmission at 433 MHz. The transmitter operates at a voltage of 3.5–12 V and the receiver captures data when powered at 5 V. Full description
In stock
€8.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
433 MHz Transmitter and Receiver Radio Module Set of Two Boards Superregenerative Reception and AM Modulation for Wireless Data Transmission

The radio transmitter and receiver set is a simple way to add wireless data transmission to your own electronic project. Both modules operate at a frequency of 433.92 MHz and utilise amplitude modulation (AM). The transmitting board converts a digital signal into radio waves, and the receiving board captures them and forwards them as data. It is suitable for hobbyists, electronics students, and anyone who wants to build their own remote control, wireless doorbell, or transmit simple commands between two devices. The range of the transmitter varies from 20 to 200 m depending on the power supply voltage.

The transmitter has small dimensions of 19 x 19 mm and three pins in the order of DATA, VCC, and GND, making it easy for beginners to connect. It operates at a voltage of 3.5 to 12 V, and the higher the voltage you choose, the greater the expected range. The output power of the transmitter is 10 mW and the transmission speed reaches 4 KB/s. The receiver is a superregenerative module with a sensitivity of 105 dB, powered by a DC voltage of 5 V and draws only about 4 mA at rest. Both modules have an ANT pin ready for connecting an external wire antenna.

  • Frequency – 433.92 MHz
  • Modulation – AM
  • Transmitter – module with DATA, VCC, and GND pins
  • Transmitter Power Supply – 3.5 to 12 V
  • Transmitter Current – 10 to 15 mA
  • Transmitter Power – 10 mW
  • Transmission Speed – 4 KB/s
  • Range – 20 to 200 m depending on power supply voltage
  • Transmitter Size – 19 x 19 mm
  • Receiver – superregenerative module
  • Receiver Power Supply – DC 5 V, quiescent current 4 mA
  • Receiver Sensitivity – 105 dB
  • Receiver Size – 30 x 14 x 7 mm
  • Recommended Antenna – wire length of 25 cm for the transmitter and 32 cm for the receiver
  • Package Contents – 1 transmitting module and 1 receiving module

For the best range, connect a piece of wire approximately 25 cm long to the ANT pin of the transmitter and a wire 32 cm long to the receiver, which can be coiled into a spiral. Store the modules in a dry place and take care not to overheat the boards while soldering the pins. Before connecting, check the correct order of the power supply pins.

This pair of radio modules is a practical foundation for wireless communication in electronic projects, experiments, and education. The transmitter and receiver operating at a frequency of 433 MHz together create a one-way radio link that can be easily connected to a microcontroller or other control electronics. The small dimensions of the boards make them easy to fit into compact enclosures. With the transmitter powered in the range of 3.5 to 12 V, you can choose the voltage according to the desired range. The set includes both the transmitter and receiver, so you can start building right after unpacking.

Price incl. VAT €8.69