Home page Home page Hobbies & Garden Development boards 433 MHz Radio Module Set Superheterodyne Receiver 30 x 10 mm and Transmitter 18 x 13 mm with Spring Antennas for Arduino
433 MHz Radio Module Set Superheterodyne Receiver 30 x 10 mm and Transmitter 18 x 13 mm with Spring Antennas for Arduino

433 MHz Radio Module Set Superheterodyne Receiver 30 x 10 mm and Transmitter 18 x 13 mm with Spring Antennas for Arduino

Wireless data transmission in the 433 MHz band for remote control and home automation. Modules with pin headers can be connected to a breadboard in just a few minutes. Full description
In stock
€8.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
433 MHz Radio Module Set Superheterodyne Receiver 30 x 10 mm and Transmitter 18 x 13 mm with Spring Antennas for Arduino

A pair of radio modules for the 433 MHz band connects two devices wirelessly, even where cables cannot be run. The receiver operates in a superheterodyne configuration, while the transmitter sends data to it via a data pin. Both boards have a four-pin header, making them easy to connect to a breadboard just like to your own printed circuit board. The receiving board measures 30 x 10 mm and fits into a small installation box. This set is aimed at DIY projects with Arduino and other microcontrollers, from remote control to the transmission of measured values.

The transmitting board, measuring 18 x 13 mm, is one of the smallest components in the entire assembly and can fit into a handheld remote control. Both boards feature a crystal that maintains the operating frequency, and the other components are in SMD format, keeping the boards low-profile and lightweight. The receiver is designated RX470C-V01 and, in addition to power pins, has a data output and a solder pad for the antenna. The transmitter has a data input and a pin for enabling transmission alongside the power supply. You can connect the included spring antennas to the antenna pads on both boards, which will fit into the project even where there is no room for longer wires.

  • Band – 433 MHz
  • Receiver – superheterodyne module designated RX470C-V01
  • Receiver dimensions – 30 x 10 mm
  • Transmitter dimensions – 18 x 13 mm
  • Connection – four-pin header on each board
  • Antenna – solder pad on the board and spring antenna included
  • Components – SMD components and crystal on both boards
  • Compatibility – Arduino Uno and other microcontrollers
  • Design – green printed circuit boards without a casing
  • Package contents – receiver module, transmitter module, and two spring antennas

The modules are suitable for remote control of lighting and sockets, for a simple wireless button, for transmitting values from a temperature or humidity sensor, and for home automation controlled by a microcontroller. Connect the transmitter to the output pin of the board, the receiver to the input pin, and the data will be processed by the library in your program. Since the boards are without a casing, handle them by the edges, avoid touching the components, and discharge yourself by touching grounded metal before connecting. Solder the antennas or firmly insert them into the prepared pads to prevent the connection from vibrating. Finally, store the completed pair in a box that protects the boards from dust and moisture.

This set provides a ready-made radio connection for a low price, which you would otherwise have to assemble from components. Both the receiver and transmitter come pre-assembled and tested; simply power them and connect them to a microcontroller. Thanks to the pin headers, you can test them first on a breadboard before soldering them into the final device. The dimensions of the boards allow you to hide the electronics even in a small remote control or in a box next to a sensor, while the Arduino Uno can handle both modules without additional circuits. In the package, you will receive both boards and two spring antennas, so you can start building right after unpacking.

Price incl. VAT €8.69