Home page Home page Hobbies & Garden Development boards 315 MHz AM Radio Module Set Transmitter and Superregenerative Receiver Power Supply 3.5–12 V and 5 V for Wireless Data Transmission
315 MHz AM Radio Module Set Transmitter and Superregenerative Receiver Power Supply 3.5–12 V and 5 V for Wireless Data Transmission

315 MHz AM Radio Module Set Transmitter and Superregenerative Receiver Power Supply 3.5–12 V and 5 V for Wireless Data Transmission

Transmitting and receiving board at a frequency of 315 MHz for DIY projects with wireless control. Range of 20 to 200 m depending on the transmitter's power supply voltage. Full description
In stock
€8.69
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
315 MHz AM Radio Module Set Transmitter and Superregenerative Receiver Power Supply 3.5–12 V and 5 V for Wireless Data Transmission

The 315 MHz radio module set includes a transmitter and receiver, allowing you to easily create a wireless connection between two parts of your own electronic device. The transmitting module sends data using amplitude modulation (AM), and the receiving module captures it on the other end. This kit is appreciated by hobbyists, modellers, and students who want to experiment with radio transmission in practice. It can be used, for example, in building your own remote control, wireless sensor, or simple signalling device. The transmitter operates with a power supply voltage of 3.5 to 12 V, and the range varies depending on the chosen voltage.

The small transmitter, measuring 19 x 19 mm, has three pins: DATA, VCC, and GND, and draws a current of 10 to 15 mA. Its output power is 10 mW, and the transmission speed is 4 KB/s. Depending on the voltage, a range of 20 to 200 m can be achieved. The superregenerative receiver is powered by a DC voltage of 5 V, its quiescent current is only 4 mA, and the reception sensitivity reaches 105 dB. Both boards have an ANT pin, to which an external wire antenna is connected.

  • Frequency – 315 MHz
  • Transmission type – one-way with AM modulation
  • Transmitting module – AM transmitter with DATA, VCC, and GND pins
  • Transmitter voltage – 3.5 to 12 V
  • Transmitter current consumption – 10 to 15 mA
  • Output power – 10 mW
  • Transmission speed – 4 KB/s
  • Range – 20 to 200 m depending on voltage
  • Transmitter size – 19 x 19 mm
  • Receiving module – superregenerative
  • Receiver voltage – DC 5 V with a quiescent current of 4 mA
  • Reception sensitivity – 105 dB
  • Receiver size – 30 x 14 x 7 mm
  • External antenna – 25 cm wire for the transmitter and 32 cm wire for the receiver
  • Package contents – 1 transmitting module and 1 receiving module at 315 MHz

You can create the transmitter's antenna from a single-core or standard wire about 25 cm long, while a 32 cm wire twisted into a spiral is suitable for the receiver. When wiring, follow the order of the pins and the power supply voltage of the individual modules. Keep the boards in a dry environment away from moisture.

The pair of modules for the 315 MHz frequency represents a simple and affordable solution for wireless data transmission for home electronic projects and education. The transmitter and receiver create a one-way radio connection that you can connect to a microcontroller or another control board. The compact size of the receiver 30 x 14 x 7 mm allows it to be placed even in a small enclosure. Superregenerative reception with a sensitivity of 105 dB ensures sensitive signal capture even at greater distances. The package includes both the transmitter and receiver, so you have everything you need for your first radio connection.

Price incl. VAT €8.69