Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates 30 Pack Splitter Quick Connectors Lever Connector 1 Input and 2 Outputs for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper for Electrical
30 Pack Splitter Quick Connectors Lever Connector 1 Input and 2 Outputs for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper for Electrical

30 Pack Splitter Quick Connectors Lever Connector 1 Input and 2 Outputs for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper for Electrical

Thirty splitter connectors with levers for distributing one conductor into two without tools. Copper contacts and a stainless steel spring securely hold each conductor. Full description
In stock
€18.30
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
30 Pack Splitter Quick Connectors Lever Connector 1 Input and 2 Outputs for Cross Section 0.08 to 2.5 mm² 32 A 250 V Copper for Electrical Installation

The package contains thirty splitter quick connectors with levers that distribute one supply conductor into two directions. On one side of the connector, there is one input hole, and on the opposite side, two outputs, with each conductor secured by a separate lever. The connectors are rated for a nominal current of 32 A and a voltage of 250 V, making them suitable for standard household lighting and socket circuits. You can make the connections without soldering, screws, or insulating tape. The connector is detachable and can be adjusted at any time.

The contact part is made of red copper, which conducts electricity well and resists corrosion. The conductor is held by a flexible clamp made of stainless steel, which retains its elasticity even after repeated lever openings. The casing is made of flame-retardant plastic with increased thermal resistance. The connector accepts conductors with a cross section of 0.08 to 2.5 mm², accommodating both thin strands and standard installation wires.

The splitter design replaces the need to join three conductors under one terminal, keeping the entire connection clear. Typically, this involves connecting two light fixtures to one supply, distributing the phase in an installation box, or connecting an additional appliance to existing wiring. Each output can be disconnected independently without releasing the input conductor or the second output. The connector works with solid conductors as well as flexible strands, as the flexible clamp adapts to their shape.

  • Design – splitter connector 1 input and 2 outputs
  • Nominal current – 32 A
  • Nominal voltage – 250 V
  • Suitable conductors – cross section 0.08 to 2.5 mm²
  • Dimensions of the connector – 29.5 x 13 x 13.3 mm
  • Contact material – red copper
  • Clamping spring – stainless steel
  • Casing – flame-retardant plastic
  • Control – three levers, one for each conductor
  • Contents of the package – 30 pcs of splitter lever connectors

The connection procedure is straightforward. Remove the insulation from the end of the conductor, lift the lever of the corresponding hole, insert the conductor until it stops, and lower the lever. Similarly, connect both output conductors on the other side of the connector. When changing the connection, lift the lever again and remove the conductor. Always turn off the circuit breaker for the relevant circuit before starting work and check that the entire stripped end of the conductor is inserted inside the connector.

Thirty pieces in the package will be appreciated by electricians, maintenance workers, and DIY enthusiasts who frequently split conductors and want to have a supply always on hand. The compact body measuring 29.5 x 13 x 13.3 mm fits into standard installation boxes and under light fixture covers. Quick connectors make it easier to modify lighting, connect sockets, and carry out minor repairs at home. The grey casing with orange levers is easily visible among other conductors. It is a practical consumable for the workshop, home, and service case.

Price incl. VAT €18.30