Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Development boards 2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 1
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 1
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 2
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 3
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 4
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT 5

2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT

Two compact boards with soldered pins for immediate insertion into a breadboard and quick prototyping with WiFi and Bluetooth without the need for a soldering iron. Full description
In stock
€27.03
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
2 pcs ESP32-C3 SuperMini Development Board with Soldered Pins 22.52 x 18 mm WiFi Bluetooth 5.0 RISC-V 160 MHz USB-C for Arduino and IoT

The package of two ESP32-C3 SuperMini development boards with soldered pins is designed for anyone who wants to start programming right out of the box. The pin headers are factory soldered on both modules, so the boards simply need to be inserted into a breadboard or socket strip and connected via USB-C cable. Each module features the ESP32-C3FN4 chip with a RISC-V processor up to 160 MHz, 400 KB SRAM, and 4 MB Flash memory. Wireless communication via WiFi 2.4 GHz and Bluetooth 5.0 LE allows connection to a home network as well as a mobile application. You will appreciate the two pieces in the package when building a transmitter and receiver or multiple sensors at once.

The board dimensions of 22.52 x 18 mm are among the smallest in its category, yet it offers 11 GPIO pins with PWM support, 4 analog inputs with 12-bit resolution, and I2C, SPI, and dual UART buses. The RESET and BOOT buttons and USB-C port simplify firmware uploading without an external programmer. The small dimensions allow for embedding even in very tight enclosures and cases.

  • Chip – ESP32-C3FN4 with a 32-bit single-core RISC-V processor up to 160 MHz and FPU
  • Memory – 400 KB SRAM, 384 KB ROM, and 4 MB Flash
  • Wireless Connectivity – WiFi 802.11b/g/n 2.4 GHz and Bluetooth 5.0 LE
  • I/O – 11 GPIO with PWM support and 4 analog ADC inputs 12-bit
  • Buses – I2C, SPI, and 2x UART
  • Interface – USB-C for power and programming
  • Buttons – RESET and BOOT
  • Deep Sleep Current – approximately 43 μA
  • Power Supply – 5 V via USB-C, output 3.3 V up to 500 mA
  • Development Board Dimensions – 22.52 x 18 mm
  • Programming – Arduino IDE, MicroPython, and ESP-IDF
  • Package Contents – 2 ESP32-C3 SuperMini development boards with soldered pin headers

The logic of the inputs and outputs operates at 3.3 V, so do not apply 5 V to the GPIO pins. The boards can be powered via USB-C, from a 3.7 to 5 V battery connected to pin 5 V, or with stabilised 3.3 V on pin 3.3. The blue LED on GPIO8 serves as a simple status indicator for the programme. Keep the modules dry and protect them from static electricity.

A pair of ready-made modules without the need for soldering saves time in both teaching and developing your own devices. With a consumption of approximately 43 μA in deep sleep mode, battery-powered sensors can operate for a long time. Programming can be done in the Arduino IDE, MicroPython, and ESP-IDF environments, for which there are numerous ready-made libraries and guides. The modules can be used in smart homes, remote control, data collection from sensors, and in school projects.

Price incl. VAT €27.03