Home page Home page Home & Household Supplies Plumbing Household water filters Water Pre-filter for Shower and 10 Replacement Inserts Made of PP Cotton Case 9 x 6 cm Transparent and Silver For Tap Washing Machine Heater and Sink
Water Pre-filter for Shower and 10 Replacement Inserts Made of PP Cotton Case 9 x 6 cm Transparent and Silver For Tap Washing Machine Heater and Sink

Water Pre-filter for Shower and 10 Replacement Inserts Made of PP Cotton Case 9 x 6 cm Transparent and Silver For Tap Washing Machine Heater and Sink

Large set of water pre-filter with 10 replacement inserts made of PP cotton. Captures sand and rust before the shower, washing machine, heater, or sink, and the supply lasts a long time. Full description
In stock
€32.71
Safe shopping Safe shopping
Overview
Water Pre-filter for Shower and 10 Replacement Inserts Made of PP Cotton Case 9 x 6 cm Transparent and Silver For Tap Washing Machine Heater and Sink

The large set includes a water pre-filter with an inserted cartridge and 10 replacement cartridges, which will last for a long time of regular changes. The filter captures sand, rust, and other mechanical impurities from the tap water before they reach the shower, washing machine, heater, or tap at the sink. The inserts made of dense PP cotton have a strong wall and filter the water throughout the entire volume without a significant drop in pressure. The filter screws in between the tap and the hose. The supply is particularly worthwhile where the water brings a lot of deposits.

The transparent case shows how quickly the cartridge becomes clogged, allowing you to easily set your own replacement interval. Both the inlet and outlet thread have a diameter of 2 cm, so the filter fits standard shower taps and hoses. The chrome-look lid matches well with bathroom and kitchen taps. The flow divider inside the case distributes the water evenly across the surface of the cartridge, ensuring it clogs evenly and captures impurities throughout the entire volume. All ten replacement cartridges have the same diameter of 3.8 cm and a length of 5.4 cm as the cartridge supplied in the case, so the replacement process is always the same. Store the supply of cartridges in a dry and clean place, ideally in the original packaging, until it is time for the next replacement.

  • Type – water pre-filter with replaceable cartridge for installation in the plumbing system
  • Dimensions of the case – height 9 cm and width 6 cm
  • Connection – thread at both the inlet and outlet with a diameter of 2 cm
  • Filter cartridge – PP cotton with a wall thickness of 9 mm, diameter 3.8 cm and length 5.4 cm
  • Material – plastic with a transparent case and lid in chrome look
  • Construction – case, lid, flow divider, filter cartridge, and seal
  • Usage – handheld shower, overhead shower, water heater, washing machine tap, and sink tap
  • Contents of the package – 1 pre-filter with an inserted filter cartridge and 10 replacement filter cartridges

The filter can be installed without modifying the plumbing in just a few minutes. Unscrew the hose from the tap, screw the filter onto the tap, and reconnect the hose to its lower thread. You can use the same procedure to install it before the water heater, washing machine, or tap at the kitchen sink. When the cartridge darkens, unscrew the case, remove the used cartridge, and insert a new one from the supply. Rinse the case with clean water during each replacement and check that the seal fits well.

The pre-filter with ten replacement cartridges is an economical solution for households with hard or contaminated tap water. It protects the shower head from clogging and captures sand and rust before the washing machine, heater, and sink. The cartridges have a wall thickness of 9 mm and filter the water throughout the entire volume. The compact case with a height of 9 cm fits even in tight spaces. The large supply of cartridges lasts for many months of use.

Price incl. VAT €32.71