Home page Home page Home & Household Supplies Plumbing Traps, wastes and connections Square Floor Drain for Bathroom Embedded in the Floor Size 10 x 10 cm and Height 4 cm Drain Diameter 4.1 cm Solid Cover Plate without Grate
Square Floor Drain for Bathroom Embedded in the Floor Size 10 x 10 cm and Height 4 cm Drain Diameter 4.1 cm Solid Cover Plate without Grate

Square Floor Drain for Bathroom Embedded in the Floor Size 10 x 10 cm and Height 4 cm Drain Diameter 4.1 cm Solid Cover Plate without Grate

Square drain 10 x 10 cm with a low body of 4 cm, designed to be installed in the floor. Water drains around the edge of the cover plate and the 4.1 cm outlet leads directly into the waste. Full description
In stock
Colour:
€32.71
Safe shopping Safe shopping
Overview
Square Floor Drain for Bathroom Embedded in the Floor Size 10 x 10 cm and Height 4 cm Drain Diameter 4.1 cm Solid Cover Plate without Grate

The square floor drain measuring 10 x 10 cm is embedded in the floor and its upper side is not formed by the usual grate, but by a solid cover plate. The plate is a separate piece set in a frame, and around it runs a gap through which water drains into the body. The total height is 4 cm, making this drain one of the low models with a compact body. The drain outlet has a diameter of 4.1 cm and points directly down from the base of the drain. Both the body and the cover plate are made of stainless steel, which withstands constant moisture and warm steam in the bathroom without losing its appearance. The frame around the plate has straight edges without decorative elements, creating only a thin line in the floor.

  • Embedded design – the drain is installed in the floor so that the top plate is flush with the tiles, meaning no prominent element protrudes in the room. The drainage then blends in with the tiles and does not attract attention, which is particularly useful in smaller bathrooms where every detail is visible.
  • Size 10 x 10 cm – the square plate with a ten-centimetre edge corresponds to the most common format for floor drains and is suitable for bathrooms as well as smaller utility rooms. The square shape also aligns with the format of standard tiles, allowing it to fit into the grout joint without unnecessary cutting of the tiles.
  • Height 4 cm – the low body fits even where there is only limited depth under the tiles, and it does not unnecessarily intrude deeply into the floor structure. The low profile also means less disruption to the floor during a typical bathroom renovation.
  • Solid cover plate – the smooth surface without perforation appears clean and does not trap dirt like a grate, while water drains through the gap around the entire edge of the plate. The plate is a separate piece, so it can be lifted during cleaning, allowing the inside of the drain to be rinsed with water.
  • Outlet 4.1 cm – the drain directs vertically downwards and connects to standard waste pipes, so there is no need to source atypical reducers or connectors. The size of 4.1 cm corresponds to common bathroom waste systems that are accounted for in plumbing layouts.
  • Stainless steel – the material resists water, steam, and common bathroom chemicals, does not corrode, and the surface can be wiped dry with a regular cloth. Stainless steel does not absorb, so no water stains or soap film remain on the surface.

Package contents:

  • 1x floor drain

This type of square drain is suitable for bathrooms, shower cubicles, and utility rooms where drainage should blend in with the floor and not appear as a technical accessory. The solid plate without a grate is easier to clean as it does not trap hair or dirt and can simply be wiped during regular bathroom cleaning. The stainless steel design is intended to be in constant contact with water and steam, ensuring the surface retains its appearance even after prolonged daily use. The size of 10 x 10 cm is among the most common formats for floor drains, making the drain fit into most standard floor openings. The low height of 4 cm also leaves enough space under the tiles for connecting the waste, making the drain suitable for thinner floors.

Price incl. VAT €32.71