Home page Home page Auto & Moto Garage Equipment Welding Supplies Stainless Steel Elbow 90° One-Sided Extended by 100 mm 1 pc For Butt Welding Outer Diameter 63 mm Wall Thickness 2 mm Stainless Steel 304 Silver
Stainless Steel Elbow 90° One-Sided Extended by 100 mm 1 pc For Butt Welding Outer Diameter 63 mm Wall Thickness 2 mm Stainless Steel 304 Silver

Stainless Steel Elbow 90° One-Sided Extended by 100 mm 1 pc For Butt Welding Outer Diameter 63 mm Wall Thickness 2 mm Stainless Steel 304 Silver

90° elbow made of stainless steel 304 with one arm extended by 100 mm. For butt welding to pipes with a diameter of 63 mm, suitable for food industry and home brewing. Full description
In stock
€66.33
Safe shopping Safe shopping
Overview
Stainless Steel Elbow 90° One-Sided Extended by 100 mm 1 pc For Butt Welding Outer Diameter 63 mm Wall Thickness 2 mm Stainless Steel 304 Silver

The 90° one-sided elbow extended by 100 mm is a sanitary fitting made of stainless steel 304, designed to change the direction of piping by 90°. The fitting has an outer diameter of 63 mm and a wall thickness of 2 mm, connecting to pipes with the same outer diameter via butt welding. One arm of the elbow is extended by 100 mm, while the other ends just after the bend. It is a sanitary fitting of hygienic quality with a polished surface, suitable for use in both the pharmaceutical and food industries. It is also useful in sanitary piping systems and for home brewing of beer and wine.

  • Angle 90° — the elbow changes the direction of the piping by 90°, allowing you to create a bend in the piping at this angle.
  • Extension 100 mm — one arm is extended by 100 mm, allowing the elbow to replace both a bend and a short straight section of piping.
  • Combination of Fittings — the elbow can be combined with other fittings made of stainless steel 304, such as T-pieces or Y-pieces, to assemble the required piping route.
  • Outer Diameter — the fitting has an outer diameter of 63 mm and is intended for pipes with the same outer diameter. We recommend verifying the outer diameter of the existing piping before ordering.
  • Wall Thickness — the wall of the fitting is thick 2 mm, which, along with the outer diameter of 63 mm, is the main dimension of the fitting. When selecting, compare both dimensions with the piping to which you will be welding the fitting.
  • Butt Welding — the fitting connects to the piping via butt welding, meaning the ends are welded to pipes of corresponding diameter, and both ends are finished with a straight cut.
  • Stainless Steel 304 — the fitting is made of stainless steel 304, also known as SUS 304, which is suitable for sanitary piping systems.
  • Polished Surface — the surface of the fitting is polished after finishing and has a silver colour.
  • Hygienic Quality — this is a sanitary fitting of hygienic quality, intended for sanitary piping systems.
  • Pharmaceutical and Food Industry — due to its hygienic quality, the fitting can be used in both the pharmaceutical and food industries.
  • Home Brewing of Beer and Wine — the fitting is also suitable for piping in home brewing of beer and wine, for example when you need to change the direction of the piping.
  • Colour — silver.
  • Package Contents — 1 piece of stainless steel elbow 90° one-sided extended by 100 mm with an outer diameter of 63 mm and a wall thickness of 2 mm.

The 90° one-sided elbow extended by 100 mm with an outer diameter of 63 mm and a wall thickness of 2 mm is a sanitary fitting for changing the direction of piping by 90°. It connects to the piping via butt welding, and the extended arm replaces a short straight section of piping. Stainless steel 304 with a polished surface and hygienic quality allows for use in both the pharmaceutical and food industries. You will find this fitting useful in sanitary piping systems as well as in home brewing of beer and wine, where you need to change the direction of the piping. The package contains 1 piece, so for multiple bends, please order the required number of pieces.

Price incl. VAT €66.33