Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED H4 Car Bulbs 12 V Set of 2 Black Part with Screw and Pair of Shiny Rods Purple-Black Cooler White-Yellow 4300 K Instead of Halogen H4
LED H4 Car Bulbs 12 V Set of 2 Black Part with Screw and Pair of Shiny Rods Purple-Black Cooler White-Yellow 4300 K Instead of Halogen H4

LED H4 Car Bulbs 12 V Set of 2 Black Part with Screw and Pair of Shiny Rods Purple-Black Cooler White-Yellow 4300 K Instead of Halogen H4

Pair of H4 LED car bulbs for 12 V in a warmer shade of 4300 K. Replacement for H4 halogens with a black part, silver rods, and a cooler with a purple cylinder. Full description
In stock
€64.59
Safe shopping Safe shopping
Overview
LED H4 Car Bulbs 12 V Set of 2 Black Part with Screw and Pair of Shiny Rods Purple-Black Cooler White-Yellow 4300 K Instead of Halogen H4

A pair of LED bulbs with a H4 base designed for cars whose main headlights use H4 halogen bulbs. The light shade labelled as white-yellow corresponds to a value of 4300 K. The bulbs are powered by a 12 V car battery. The black square part with a screw carries a beam with a chip, flanked by two silver rods. At the bottom is a purple cylinder, above it are the black ribs of the cooler and a blue ring.

  • H4 Base and Lights — halogen H4 is typically dual filament, providing both dipped and main beam in one headlight. If your vehicle uses H4 bulbs, you will find the designation on the base or in the user manual.
  • Colour Tone 4300 K — thanks to the yellowish component, the light does not appear as cold as pure white. However, it remains whiter than the light from H4 halogen bulbs. It is suitable for drivers who expect only a slight change in light colour from the replacement.
  • 12 V in Cars — the set is designed for vehicles with a 12 V electrical system, suitable for standard passenger cars. The set is not suitable for trucks and buses.
  • Screwed Holder — the square black part is connected with a star-headed screw and has narrow cutouts on the sides. From this part extends a beam with a chip towards the tip of the bulb.
  • Chip and Rods — the yellow chip is surrounded on two sides by shiny cylindrical rods that extend beyond the black part.
  • Cooler Colours — the ribbed part of the cooler is black, while the cylindrical bottom part is purple. The cooler is the widest part of the entire bulb.
  • Headlight Depth — the cover of the H4 headlight is usually close to the bulb, so check that the LED bulb with cooler fits underneath it. In some cars, there is little space behind the headlight.
  • Pair for Both Sides — both bulbs have the same design, ensuring that the lights on the left and right will shine in the same shade of 4300 K. Replacing only one unit would result in differing colours between the sides.
  • H4 Replacement Procedure — replace the halogen bulb only after it has cooled down and insert the LED bulb into the headlight as the original did. Do not touch the chip or rods with your fingers during this process.
  • Testing — immediately after installation, switch on the headlights and compare whether both sides shine equally. Any change in light height should be adjusted at a service centre.
  • Compliance with Regulations — for information on whether you may use H4 LED bulbs in the halogen headlights of your car, consult a service centre or a technical inspection station.

Contents of the package:

  • 2x LED H4 Bulb with Purple Cooler

The package containing 2 units of H4 LED bulbs is intended for vehicles with a 12 V onboard voltage. The white-yellow tone of 4300 K is a compromise between halogen and cool white. Typical features include the star screw on the black part and the purple base of the cooler. Please verify the base type and the available space under the headlight cover before ordering. Both bulbs will replace H4 halogen bulbs in both the left and right main headlights.

Price incl. VAT €64.59