Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED H4 Bulbs for Passenger Cars K69-H4-6K Pack of 2 12 V 300 W Cooler with Slanted Fins Cool White 6000 K Instead of Halogen H4 Bulbs
LED H4 Bulbs for Passenger Cars K69-H4-6K Pack of 2 12 V 300 W Cooler with Slanted Fins Cool White 6000 K Instead of Halogen H4 Bulbs

LED H4 Bulbs for Passenger Cars K69-H4-6K Pack of 2 12 V 300 W Cooler with Slanted Fins Cool White 6000 K Instead of Halogen H4 Bulbs

A pair of LED bulbs with H4 base as a replacement for halogens in car headlights. Cool white 6000 K, power 300 W, powered by 12 V, and a silver cooler with fins. Full description
In stock
€51.48
Safe shopping Safe shopping
Overview
LED H4 Bulbs for Passenger Cars K69-H4-6K Pack of 2 12 V 300 W Cooler with Slanted Fins Cool White 6000 K Instead of Halogen H4 Bulbs

LED car bulbs with H4 base are sold in a pack of two and serve as a replacement for halogen H4 bulbs in car headlights. The colour of their light is cool white 6000 K, noticeably whiter than that of halogen. The bulbs connect to a 12 V onboard network and the product has a stated power of 300 W. The light-emitting part consists of LED chips on a flat carrier that extends from a cylindrical neck. Below the neck is a silver cooler with a series of slanted fins.

  • Headlights with H4 — H4 bulbs are used in main headlights, where one bulb typically provides both dipped and main beam lights. To check if your vehicle is equipped with H4 bulbs, refer to the original bulb or the technical documentation of the vehicle.
  • Catalogue designation — the set can be found under the designation K69-H4-6K, where the middle part H4 indicates the type of base.
  • Light shade — the value of 6000 K falls among the cool shades of white. The difference compared to the warmer light of halogen H4 bulbs is noticeable immediately upon switching on.
  • Chip arrangement — LED chips form a rectangular area divided into several yellow sections, embedded in a flat carrier.
  • Cooling body — the silver cooler has slanted fins around its perimeter, allowing air to flow between them. Below the fins, there is a cylindrical part with several horizontal grooves.
  • Onboard voltage 12 V — the set is intended for passenger cars with a twelve-volt electrical system. Do not install it in vehicles with a 24 V system.
  • Symmetrical lighting — when replacing both bulbs simultaneously, there will be no situation where one headlight shines white and the other yellow.
  • Space under the bonnet — the length of the cooler increases the depth that the bulb occupies behind the headlight. Therefore, check that there is enough space in the engine compartment for the headlight protective cover as well.
  • How to replace the bulbs — with the ignition off, remove the headlight cover, release the original halogen H4 bulb and remove it. Insert the LED bulb into the same position, secure it, and replace the cover. Always hold the bulb by the cooler during this process.
  • Function verification — the best way to assess the result of the replacement is in the evening in front of a garage or wall, where the light distribution from both headlights can be seen. If the light boundary is higher or lower than before, have the headlights adjusted by a service.
  • Regulations and headlights — LED bulbs in halogen headlights may not be permitted for use on public roads everywhere. Before using them, find out what rules apply to your vehicle.

Contents of the package:

  • 2x H4 LED Car Bulb 6000 K

The K69-H4-6K set includes a pair of LED car bulbs with an H4 base and a cool white light colour of 6000 K. The product has a stated power of 300 W and operates at 12 V, which is common for passenger cars. The silver cooler with slanted fins dissipates heat from the chips. Before ordering, it is advisable to verify the type of bulb in the headlight and the depth of the space behind it. The pair of bulbs in the package covers both the left and right headlights.

Price incl. VAT €51.48