Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED H11 Car Bulbs K69-H11-6K Pair for Both Headlights 300 W 12 V Cooler and LED Chips on the Bar Cool White 6000 K Instead of Halogen H11
LED H11 Car Bulbs K69-H11-6K Pair for Both Headlights 300 W 12 V Cooler and LED Chips on the Bar Cool White 6000 K Instead of Halogen H11

LED H11 Car Bulbs K69-H11-6K Pair for Both Headlights 300 W 12 V Cooler and LED Chips on the Bar Cool White 6000 K Instead of Halogen H11

Pair of LED car bulbs with H11 base and cool white light 6000 K. Power 300 W, voltage 12 V, designation K69-H11-6K and prominent cooler with angled fins. Full description
In stock
€42.75
Safe shopping Safe shopping
Overview
LED H11 Car Bulbs K69-H11-6K Pair for Both Headlights 300 W 12 V Cooler and LED Chips on the Bar Cool White 6000 K Instead of Halogen H11

This set includes two LED car bulbs with a H11 base for replacement in car headlights. The light colour corresponds to cool white 6000 K and is similar to daylight. The bulbs require a board voltage of 12 V and their power is 300 W. They emit light from LED chips on a narrow flat bar at the top of the bulb. The lower half consists of a silver cooler with angled fins.

  • Where H11 is Used — H11 bulbs are installed in fog lights or dipped beam headlights, depending on the specific model of the vehicle. You can find the correct type in the vehicle's user manual or directly on the original bulb.
  • Code K69-H11-6K — the H11 base type is included directly in the code K69-H11-6K, which makes it easy to locate the set.
  • Shade 6000 K — light with a temperature of 6000 K appears pure white, without the yellow tint typical of halogens. However, on wet roads or in fog, white light reflects differently than the yellower halogen, so consider which lights you will install the bulbs in.
  • Bar with Chips — the flat bar carries LED chips with a yellow layer and has a small hole at the top end. The bar transitions into a cylindrical neck above the cooler.
  • Cooler — the angled fins of the cooler increase the area through which heat is transferred to the surrounding air. Below, the cooler is finished with a smooth cylinder with circumferential grooves.
  • 12 V Wiring — the bulbs are designed for a 12 V onboard network. Vehicles with a 24 V system require different bulbs.
  • Two Pieces in the Set — one bulb is for the left side and the other for the right side, ensuring that the light from both headlights will have the same colour.
  • Depth Behind the Headlight — the cooler is longer than that of a halogen bulb, so please check in advance that there is enough space behind the headlight for the cover as well. In some vehicles, it may be necessary to use a different headlight cover.
  • Installation Procedure — keep the lights off, remove the old bulb, and insert the LED bulb so that the chips are pointing sideways, as is usually recommended for LED bulbs.
  • Testing and Adjustment — after replacement, turn on the lights against the garage wall and compare the height and shape of the light areas on both sides. Differences between the sides can be addressed by adjusting the headlights at a professional service.
  • Legislation — the use of LED replacements for halogen bulbs on public roads is regulated by regulations, which you should familiarise yourself with before installation.
  • H11 Replacement — LED bulbs replace halogen H11 bulbs. Keep the original bulbs for future reference.

Contents of the package:

  • 2x LED H11 Car Bulb K69-H11-6K

The LED car bulb set K69-H11-6K contains two pieces with an H11 base. The cool white light 6000 K differs from halogen by its pure white shade. The bulbs have power of 300 W and a cooler with angled fins. They are designed for vehicles with a 12 V voltage. Checking the base and space behind the headlight will save you from potential returns before purchasing.

Price incl. VAT €42.75