Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED H11 Bulbs for Cars Pack of 2 Chips 5570 CSP 3.5 x 7.5 x 1.4 cm Body with Black Cooler White 6000 K Replacement for H11 Halogen Bulb
LED H11 Bulbs for Cars Pack of 2 Chips 5570 CSP 3.5 x 7.5 x 1.4 cm Body with Black Cooler White 6000 K Replacement for H11 Halogen Bulb

LED H11 Bulbs for Cars Pack of 2 Chips 5570 CSP 3.5 x 7.5 x 1.4 cm Body with Black Cooler White 6000 K Replacement for H11 Halogen Bulb

Replace H11 halogen bulbs with LED. Set of 2 with 5570 CSP chips, white light 6000 K and black cooler. Each piece measures 3.5 x 7.5 x 1.4 cm. Full description
In stock
€35.76
Safe shopping Safe shopping
Overview
LED H11 Bulbs for Cars Pack of 2 Chips 5570 CSP 3.5 x 7.5 x 1.4 cm Body with Black Cooler White 6000 K Replacement for H11 Halogen Bulb

You can replace H11 halogen bulbs in your car with this set of two LED bulbs with H11 base. On the flat beam of each bulb are 5570 CSP chips with a yellow luminous surface. The light emitted by the chips is white with a temperature of 6000 K. Following the bright beam with black graphics is a black body with cooling fins. The stated size of one bulb is 3.5 x 7.5 x 1.4 cm.

  • Where H11 is found — bulbs of this type can be found in many cars in fog lights and in some models also in dipped headlights. The inscription on the base of the old bulb will assure you.
  • Chips and their placement — the 5570 CSP chips are located on the side surface of the beam, allowing the light to emit sideways from the axis of the bulb. The chip block has a rectangular shape and occupies only a small part of the beam.
  • Colour temperature — the figure of 6000 K describes the colour of the light. The bulbs thus emit white light at 6000 K, while H11 halogen bulbs shine yellow.
  • Graphics and colours — the beam is light with a black pattern, the body beneath it is black, and a red ring separates it from the upper part.
  • Cooling fins — the black cooler is intricate, with many fins and gaps between them. The shape helps heat from the chips dissipate into the surroundings.
  • Space for the cooler — the LED bulb measuring 3.5 x 7.5 x 1.4 cm has greater space requirements behind the light than the halogen H11. Therefore, shine a torch behind the light before ordering and estimate the available space.
  • Left and right light — the pack is designed for replacement on both sides of the vehicle, so that the lights do not shine in different shades. Both bulbs in the set are the same.
  • When replacing H11 — start the replacement only after the old bulb has cooled down after turning off the lights. Insert the new bulb into the opening in the same position and secure it with the same motion as you released the original.
  • Care during installation — keep the luminous surface of the chips clean and do not touch it when installing. The bulb is best held by its black body beneath the beam.
  • Test lighting — after installation, turn on the lights and check if both sides are lit. If the height or direction of the beam changes, consult a professional service for adjustment.
  • Legal operation — LED bulbs in halogen lights may be subject to restrictions. Check the applicable regulations before taking them on the road.

Package contents:

  • 2x LED replacement for H11 halogen bulb

The package contains 2 pieces of LED bulbs with H11 base and 5570 CSP chips. With a temperature of 6000 K, their light has a white tone. Both pieces have the same black body with cooler and red ring. The size of 3.5 x 7.5 x 1.4 cm per piece will help you assess whether the bulb will fit in your light. The set is useful wherever the car uses H11 halogen bulbs.

Price incl. VAT €35.76