Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED H1 Car Bulbs 12 V Pack of 2 Black Holder with Screw and Purple Heat Sink Part White-Yellow 4300 K Replacement for Halogen H1 Bulbs
LED H1 Car Bulbs 12 V Pack of 2 Black Holder with Screw and Purple Heat Sink Part White-Yellow 4300 K Replacement for Halogen H1 Bulbs

LED H1 Car Bulbs 12 V Pack of 2 Black Holder with Screw and Purple Heat Sink Part White-Yellow 4300 K Replacement for Halogen H1 Bulbs

Pair of LED car bulbs H1 for 12 V onboard network with white-yellow light 4300 K. Chip between shiny rods, black holder and heat sink with purple finish. Full description
In stock
€66.33
Safe shopping Safe shopping
Overview
LED H1 Car Bulbs 12 V Pack of 2 Black Holder with Screw and Purple Heat Sink Part White-Yellow 4300 K Replacement for Halogen H1 Bulbs

If you wish to replace halogen H1 bulbs in your car with LEDs, this pair of bulbs with H1 base will serve you well. The colour of their light is white-yellow with a temperature of 4300 K. The bulbs connect to the car's onboard voltage of 12 V. Above the black holder, a beam with chips and a pair of shiny silver rods protrudes. The heat sink with black fins and a purple finish is separated from the base by a blue ring.

  • Use of H1 base — in some cars, you will find H1 bulbs in high beam lights, while in others, they are used in fog lights or auxiliary lights. You can verify the correct type by checking the inscription on the old bulb.
  • Warm light shade — the value of 4300 K lies between the yellowish light of halogen and the cool white light emitted by many LED bulbs. For drivers who do not prefer cool white, this is a compromise between both shades.
  • 12 V power supply — the bulbs are designed for an onboard network of 12 V, which most passenger cars have. They are not suitable for vehicles with higher voltage.
  • Screw and cut-outs — on the side of the black holder, there is a screw with a star-shaped head, around which longitudinal cut-outs run. The holder has a square shape and connects to the base.
  • Chips between rods — the chip with a yellow luminous area lies between two shiny rods that surround it on both sides. The rods extend above the holder to the tip of the beam.
  • Blue ring and heat sink — the blue ring separates the base from the heat sink, which has black fins and a purple lower part. The fins are distributed around the entire circumference of the heat sink.
  • Space behind the light — the overall length of the LED bulb with the heat sink exceeds that of the halogen H1. Before ordering the set, measure the free space behind the light including the cover.
  • Same shade on both sides — the set contains two identical pieces, so the lights on both sides of the car will have the same colour after replacement. Both bulbs also have the same appearance.
  • How to replace H1 — perform the replacement with the lights turned off and the original bulb cooled down. Hold the new bulb by the heat sink to keep the chip and rods clean.
  • Testing the lights — after replacement, turn on the lights in which the H1 bulbs are installed and compare the left and right sides. If there is a difference in light height, adjustment at a garage may help.
  • Legality of LEDs — before installing LED bulbs in halogen lights, check what the regulations applicable to your vehicle say about it.

Contents of the package:

  • 2x LED H1 Car Bulb for 12 V

The set contains 2 pieces of LED H1 bulbs for cars with a 12 V onboard network. The temperature of 4300 K gives the light a warmer white tone with a hint of yellow. At first glance, you can recognise the bulbs by the purple lower part of the heat sink and the silver rods around the chip. You can verify compatibility with your car by checking the H1 marking on the old bulb. The set is suitable as a replacement for halogen H1 bulbs.

Price incl. VAT €66.33