Home page Home page Auto & Moto Car bulbs LED headlight bulbs LED Car Bulbs H8 H9 H11 K9C PLUS Set of 2 12 V 200 W Aluminium Body with Fan Cool White 6000 K For Car Front Headlights
LED Car Bulbs H8 H9 H11 K9C PLUS Set of 2 12 V 200 W Aluminium Body with Fan Cool White 6000 K For Car Front Headlights

LED Car Bulbs H8 H9 H11 K9C PLUS Set of 2 12 V 200 W Aluminium Body with Fan Cool White 6000 K For Car Front Headlights

Pair of K9C PLUS bulbs with active cooling and copper tubes. Cool white light 6000 K with a common base H8 H9 H11 for a 12 V onboard network. Full description
In stock
€89.91
Safe shopping Safe shopping
Overview
LED Car Bulbs H8 H9 H11 K9C PLUS Set of 2 12 V 200 W Aluminium Body with Fan Cool White 6000 K For Car Front Headlights

LED car bulbs K9C PLUS with base H8 H9 and H11 replace the original halogen lighting in the front headlights of passenger cars, and the package contains two pieces for both the left and right sides of the vehicle. According to the manufacturer's specifications, one design is intended for types H8, H9, and H11, thus covering all three base designations. The bulb body is aluminium, complemented at the rear with a ribbed heatsink and a fan that actively dissipates heat from the vicinity of the diodes, and inside, copper tubes conduct heat away from the LED chip. Colour temperature 6000 K corresponds to a cool white light, whose shade is close to daylight and differs from the yellowish glow of traditional halogen bulbs. According to the information on the packaging, it is an all-in-one design with a plug-and-play connection to the twelve-volt onboard network.

  • Base H8 H9 and H11 — one design of the bulb is intended for three common base designations used in the front headlights of passenger vehicles.
  • Set of 2 — the pair of bulbs allows for simultaneous replacement of the lighting on both sides of the vehicle, maintaining a consistent light shade.
  • Model K9C PLUS — the series designation is indicated on the packaging and on the bulb body, making it easier to purchase a matching piece later.
  • Light colour 6000 K — cool white shade without a significant yellow tint, close to daylight.
  • Power supply 12 V — the bulbs are designed for the twelve-volt onboard network of a passenger car.
  • Power consumption 200 W — the manufacturer states a power consumption of 200 W for the K9C PLUS series, while the K7C series is stated as 150 W.
  • Recommendation for H11 — for type H11, the manufacturer indicates suitability for headlights with projector lenses and does not recommend installation in reflector headlights.
  • Fan 39 mm — the cooling fan has seven blades and a diameter of 39 mm, compared to 36 mm for the K7C series.
  • Copper tubes — heat from the LED chip is dissipated by copper tubes leading to the ribbed heatsink.
  • Aluminium body — the metal casing with longitudinal ribs forms the passive part of the cooling system and also supports the entire structure.
  • Braided cable — the supply cable is equipped with a textile braid resistant to higher temperatures and deformation.
  • Plug and play — according to the description on the packaging, the bulb connects to the original headlight connector without further modification of the wiring.

Contents of the package:

  • 2x LED Car Bulb H8 H9 H11 12 V 6000 K

Before purchasing, we recommend verifying which of the designations H8, H9, or H11 your vehicle uses, and checking the available space behind the headlight, as the bulb has a fan and ribbed heatsink at the rear. Installation is carried out in the same way as with the original halogen bulb: the holder is released, the old bulb is removed, and the new one is installed in its place. With the pair of pieces in the package, both sides of the vehicle shine with the same cool white light 6000 K. Active cooling with copper tubes keeps heat away from the LED chip area. The K9C PLUS series thus represents a variant with a higher stated power consumption than the older K7C series.

Price incl. VAT €89.91