Home page Home page Auto & Moto Car bulbs LED headlight bulbs LED Car Bulbs H1 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Headlights
LED Car Bulbs H1 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Headlights

LED Car Bulbs H1 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Headlights

The K9C PRO model is suitable for reflector headlights according to the manufacturer. White light 4300 K with H1 base and active cooling for the vehicle's 12 V electrical system. Full description
In stock
€85.55
Safe shopping Safe shopping
Overview
LED Car Bulbs H1 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Headlights

The K9C PRO LED car bulbs with H1 base replace the original halogen lighting in the front headlights of passenger cars, and the package includes two pieces for both the left and right sides of the vehicle. The manufacturer states that the K9C PRO series uses the same chips as the older K7C series, thus marking it as a suitable choice for reflector headlights. The bulb body is made of aluminium, complemented at the rear with a ribbed heat sink and fan, and copper tubes are routed inside to dissipate heat from the LED chip. The colour temperature of 4300 K corresponds to white light with a warmer shade than the 6000 K variants. According to the packaging information, it is an all-in-one design with plug and play connection to the twelve-volt electrical system.

  • H1 Base — the H1 design is used in the front headlights of passenger vehicles, and the bulb is inserted in place of the original halogen bulb.
  • Set of 2 — the pair of bulbs allows for simultaneous replacement of the lighting on both sides of the vehicle, maintaining a consistent light shade.
  • K9C PRO Model — the series designation is indicated on the packaging as well as on the bulb body, making it easier to purchase a matching piece later.
  • For Reflector Headlights — the manufacturer recommends the K9C PRO series as a suitable choice for reflector headlights due to the chips used.
  • Colour Temperature 4300 K — white light with a warmer shade compared to the 6000 K variants, thus closer to the shade of the original halogen lighting.
  • Power Supply 12 V — the bulbs are designed for the twelve-volt electrical system of passenger vehicles.
  • Power Consumption 130 W — the manufacturer indicates a power consumption of 130 W for the K9C PRO series, while the K7C series is indicated as 110 W.
  • 39 mm Fan — the cooling fan has seven blades according to the manufacturer and a diameter of 39 mm, compared to five blades and 36 mm in the K7C series.
  • Copper Tubes — compared to the older series, the tubes that dissipate heat from the chip have a larger cross-section.
  • Aluminium Body — the metal casing with longitudinal ribs forms the passive part of the cooling system and also supports the entire construction.
  • Braided Cable — the cable material is modified for higher resistance to heat and deformation according to the manufacturer.
  • Plug and Play — according to the description on the packaging, the bulb connects with the original headlight connector without any further modification of the wiring.

Package Contents:

  • 2x LED Car Bulb H1 12 V 4300 K

Before purchasing, we recommend verifying that your vehicle uses the H1 base and checking the available space behind the headlight for the cooling part with the fan. Installation is the same as with the original halogen bulb: the holder is released, the old bulb is removed, and the new one is installed in its place. According to the manufacturer, the K9C PRO series is primarily intended for reflector headlights, distinguishing it from the K9C PLUS series. With a pair of pieces in the package, both sides of the vehicle shine with the same white light of 4300 K. The higher indicated power consumption of 130 W and the larger fan differentiate this series from the older K7C.

Price incl. VAT €85.55