Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED Car Bulbs H1 K69-H1-6K Set of 2 300 W 12 V Ribbed Cooler and LED Chips Cool White 6000 K Replacement for H1 Halogen Bulbs
LED Car Bulbs H1 K69-H1-6K Set of 2 300 W 12 V Ribbed Cooler and LED Chips Cool White 6000 K Replacement for H1 Halogen Bulbs

LED Car Bulbs H1 K69-H1-6K Set of 2 300 W 12 V Ribbed Cooler and LED Chips Cool White 6000 K Replacement for H1 Halogen Bulbs

Pair of H1 LED bulbs for vehicles with a 12 V electrical system and cool white light 6000 K. Power 300 W, designation K69-H1-6K and body with a ribbed cooler. Full description
In stock
€41.44
Safe shopping Safe shopping
Overview
LED Car Bulbs H1 K69-H1-6K Set of 2 300 W 12 V Ribbed Cooler and LED Chips Cool White 6000 K Replacement for H1 Halogen Bulbs

The package contains a pair of LED car bulbs with H1 base, designed for the headlights of passenger cars. The bulbs emit cool white light at 6000 K, which is significantly whiter than standard halogen bulbs. They operate at a voltage of 12 V and their stated power is 300 W. The LED chips are mounted on a flat bracket, beneath which is a cylindrical neck and a ribbed cooler. The surface of the body is silver-grey and glossy.

  • H1 Base — this type of base is used, for example, in high beam or fog lights of certain vehicles. You can find out which type of bulb your vehicle requires in the user manual or on the original bulb.
  • Product Designation — the bulbs are designated K69-H1-6K, which includes the H1 base type. The same designation can be found in the product name, making it easier to purchase an additional set if needed.
  • Cool White Light — the colour temperature of 6000 K gives the light a white shade with a slight blue tint. The white light at 6000 K is visibly different from the yellower halogen light at first glance.
  • Chips on Bracket — the LED chips have a yellow surface and are embedded in the upper part of the flat metal bracket. At the very top, the bracket has a small round hole.
  • Ribbed Cooler — the cooler consists of slanted ribs, beneath which are horizontal grooves. Its purpose is to dissipate heat generated in the LED chips.
  • 12 V Electrical System — the bulbs are intended for vehicles with a twelve-volt electrical system. Do not use them in trucks with a voltage of 24 V.
  • Pair for Both Sides — the package contains identical bulbs for the left and right headlights, so both sides of the vehicle will emit the same white light.
  • Space Check — before purchasing, measure how much space is behind the headlight, as the cooler extends the bulb backwards. It is important that the dust cover can be reattached.
  • When Replacing — remove the original bulb, insert the new one into the same position, and do not touch the LED chips with your fingers. When handling, hold the bulb by the metal cooler.
  • After Replacement — turn on the lights and compare whether both sides shine equally and the light is aimed correctly. If necessary, have the headlight alignment adjusted at a service centre.
  • Usage Regulations — whether you may use LED bulbs on public roads depends on applicable regulations and the specific headlight, so please verify this before installation.
  • Halogen Replacement — the bulbs serve as a replacement for H1 halogen bulbs, and you may keep the original pieces as spares.

Contents of the package:

  • 2x H1 LED car bulb designated K69-H1-6K

LED car bulbs H1 designated K69-H1-6K are supplied in pairs for both headlights. The stated power of 300 W is complemented by the cool white light colour of 6000 K. The bulbs are intended for vehicles with a 12 V electrical system. The ribbed cooler at the bottom of the bulb takes care of heat dissipation. Before ordering, please check that your vehicle uses H1 bulbs and that there is enough space behind the headlight.

Price incl. VAT €41.44