Home page Home page Auto & Moto Car bulbs Xenon car bulbs LED Car Bulbs D1S Set of 2 70 W Aluminium Body with Fan and IP68 Rating Cool White 6000 K Replacement for Xenon Bulbs in Headlights
LED Car Bulbs D1S Set of 2 70 W Aluminium Body with Fan and IP68 Rating Cool White 6000 K Replacement for Xenon Bulbs in Headlights

LED Car Bulbs D1S Set of 2 70 W Aluminium Body with Fan and IP68 Rating Cool White 6000 K Replacement for Xenon Bulbs in Headlights

Designed for D1S socket with plug and play connection and installation in five minutes. Cool white light 6000 K with IP68 rating and aluminium cooler. Full description
In stock
€68.08
Safe shopping Safe shopping
Overview
LED Car Bulbs D1S Set of 2 70 W Aluminium Body with Fan and IP68 Rating Cool White 6000 K Replacement for Xenon Bulbs in Headlights

LED car bulbs with D1S socket replace the original xenon bulb in the front headlights of passenger cars, and the package contains two pieces for both the left and right sides of the vehicle. The bulb body is made of aluminium, ribbed around the perimeter, and equipped with a cooling fan at the rear, which dissipates heat from the LED chip. Colour temperature 6000 K corresponds to a cool white light, whose shade is close to daylight and differs from the yellowish glow of a worn-out bulb. The manufacturer specifies a power consumption of 70 W for this series and an IP68 rating against dust and water ingress. The connection is designed as plug and play; the bulb is inserted into the original opening in the headlight and connected with the supplied connector.

  • D1S Socket — the bulb is inserted in place of the original D1S xenon bulb and uses the original mounting in the headlight.
  • Set of 2 — a pair of bulbs allows for simultaneous replacement of lighting on both sides of the vehicle, maintaining a consistent light shade.
  • Light Colour 6000 K — cool white shade without a significant yellow tint, close to daylight.
  • Power Consumption 70 W — value specified in the product parameters for one bulb.
  • IP68 Rating — the manufacturer states resistance to dust and water ingress, suitable for the headlight space.
  • Aluminium Body — ribbed aluminium casing forms the passive part of the cooling system and also supports the entire structure.
  • Cooling Fan — active cooling with 12000 RPM is located at the rear of the bulb body.
  • Luminous Flux — the manufacturer specifies 12000 lm for this series.
  • Plug and Play — the bulb connects with the original headlight connector without any additional wiring modifications.
  • Installation in Four Steps — insert the bulb, turn into position, connect the connector, and secure the cover.
  • D SERIES Range — the series designation is indicated on the packaging and on the bulb body, making it easier to purchase a matching piece later.
  • Compact Shape — flat body with diodes follows the shape of the original bulb socket.

Package Contents:

  • 2x LED Car Bulb D1S 6000 K

Before purchasing, we recommend verifying whether your vehicle uses a D1S bulb, as the socket type must match the original light source. Also, check the available space behind the headlight, as there is a aluminium cooler with fan at the rear of the bulb. According to the manufacturer, installation takes approximately five minutes and involves four steps: inserting, turning, connecting the connector, and fitting the cover. With a pair of pieces in the package, both sides of the vehicle shine with the same cool white light 6000 K. The combination of aluminium body, active cooling, and IP68 rating forms the structural basis of this series.

Price incl. VAT €68.08