Home page Home page Auto & Moto Car bulbs LED headlight bulbs LED Car Bulbs 9012/HIR2 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights
LED Car Bulbs 9012/HIR2 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

LED Car Bulbs 9012/HIR2 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

The K9C PRO model is suitable for reflector headlights according to the manufacturer. White light 4300 K with a base of 9012/HIR2 and active cooling for a 12 V onboard system. Full description
In stock
€88.17
Safe shopping Safe shopping
Overview
LED Car Bulbs 9012/HIR2 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

The K9C PRO LED car bulbs with base 9012/HIR2 replace the original halogen lighting in the front headlights of passenger cars, and the package contains two pieces for both the left and right sides of the vehicle. The manufacturer states that the K9C PRO series uses the same chips as the older K7C series, thus marking it as a suitable choice for reflector headlights. The bulb body is made of aluminium, complemented at the rear with a ribbed heatsink and fan, and inside are copper tubes that dissipate heat from the LED chip. Colour temperature 4300 K corresponds to white light with a warmer shade than the 6000 K variants. According to the information on the packaging, it is an all-in-one design with a plug and play connection to the twelve-volt onboard system.

  • Base 9012/HIR2 — the 9012 design is also referred to as HIR2, and the bulb is inserted in the position of the original halogen bulb.
  • Set of 2 — the pair of bulbs allows for simultaneous replacement of the lighting on both sides of the vehicle, maintaining a consistent light shade.
  • Model K9C PRO — the series designation is indicated on the packaging as well as on the bulb body, making it easier to purchase a matching piece later.
  • For reflector headlights — the manufacturer identifies the K9C PRO series as a suitable choice for reflector headlights due to the chips used.
  • Colour temperature 4300 K — white light with a warmer shade compared to the 6000 K variants, thus closer to the shade of original halogen lighting.
  • Power supply 12 V — the bulbs are designed for twelve-volt onboard systems of passenger cars.
  • Power consumption 130 W — the manufacturer specifies a power consumption of 130 W for the K9C PRO series, while the K7C series is listed at 110 W.
  • Fan 39 mm — the cooling fan features seven blades and a diameter of 39 mm, compared to five blades and 36 mm in the K7C series.
  • Copper tubes — compared to the older series, the tubes that dissipate heat from the chip have a larger cross-section.
  • Aluminium body — the metal casing with longitudinal ribs forms the passive part of the cooling system and also supports the entire structure.
  • Braided cable — the material of the cable is modified for higher resistance to heat and deformation according to the manufacturer.
  • Plug and play — according to the description on the packaging, the bulb connects to the original headlight connector without further modification of the wiring.

Contents of the package:

  • 2x LED car bulb 9012/HIR2 12 V 4300 K

Before purchasing, we recommend verifying whether your vehicle uses type 9012 or HIR2, and checking for free space behind the headlight for the cooling part with the fan. Installation is carried out in the same manner as with the original halogen bulb: the holder is released, the old bulb is removed, and the new one is placed in its position. According to the manufacturer, the K9C PRO series is primarily intended for reflector headlights, which distinguishes it from the K9C PLUS series. With a pair of pieces in the package, both sides of the vehicle shine with the same white light 4300 K. The higher specified power consumption of 130 W and larger fan distinguish this series from the older K7C.

Price incl. VAT €88.17