Home page Home page Auto & Moto Car bulbs LED headlight bulbs LED Car Bulbs 9005/HB3 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights
LED Car Bulbs 9005/HB3 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

LED Car Bulbs 9005/HB3 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

The K9C PRO model is suitable for reflector headlights according to the manufacturer. White light 4300 K with a socket 9005/HB3 and active cooling for a 12 V onboard network. Full description
In stock
€87.73
Safe shopping Safe shopping
Overview
LED Car Bulbs 9005/HB3 K9C PRO Set of 2 12 V 130 W Aluminium Body with Fan White Light 4300 K For Car Reflector Headlights

The K9C PRO LED car bulbs with socket 9005/HB3 replace the original halogen lighting in the front headlights of passenger cars, and the package contains two pieces for both the left and right sides of the vehicle. The manufacturer states that the K9C PRO series uses the same chips as the older K7C series, thus marking it as a suitable choice for reflector headlights. The bulb body is made of aluminium, complemented at the rear with a ribbed heatsink and fan, and inside, copper tubes are routed to dissipate heat from the LED chip. The colour temperature of 4300 K corresponds to white light with a warmer tone than the 6000 K variants. According to the packaging information, it is an all-in-one design with a plug-and-play connection to a twelve-volt onboard network.

  • Socket 9005/HB3 — the 9005 design is also referred to as HB3 in car bulbs, and the bulb is inserted in the position of the original halogen bulb.
  • Set of 2 — the pair of bulbs allows for simultaneous replacement of lighting on both sides of the vehicle, maintaining a consistent light tone.
  • Model K9C PRO — the series designation is indicated on the packaging and on the bulb body, making it easier to purchase a matching piece later.
  • For reflector headlights — the manufacturer lists the K9C PRO series as a suitable choice for reflector headlights due to the chips used.
  • Colour temperature 4300 K — white light with a warmer tone compared to the 6000 K variants, thus closer to the tone of the original halogen lighting.
  • Power supply 12 V — the bulbs are designed for a twelve-volt onboard network of a passenger car.
  • Power consumption 130 W — the manufacturer states a power consumption of 130 W for the K9C PRO series, while the K7C series is listed as 110 W.
  • Fan 39 mm — the cooling fan has seven blades according to the manufacturer and a diameter of 39 mm, compared to five blades and 36 mm in the K7C series.
  • Copper tubes — compared to the older series, the tubes conducting heat away from the chip have a larger cross-section.
  • Aluminium body — the metal casing with longitudinal ribs forms the passive part of the cooling system and also supports the entire construction.
  • Braided cable — the material of the cable is modified by the manufacturer for higher resistance to heat and deformation.
  • Plug and play — according to the description on the packaging, the bulb connects using the original headlight connector without any further wiring modifications.

Contents of the package:

  • 2x LED Car Bulb 9005/HB3 12 V 4300 K

Before purchasing, we recommend verifying that your vehicle uses type 9005 or HB3, and checking the available space behind the headlight for the cooling part with the fan. Installation is carried out in the same manner as the original halogen bulb: the holder is released, the old bulb is removed, and the new one is inserted in its place. According to the manufacturer, the K9C PRO series is primarily intended for reflector headlights, which distinguishes it from the K9C PLUS series. Thanks to the pair of pieces in the package, both sides of the vehicle shine with the same white light of 4300 K. The higher stated power consumption of 130 W and the larger fan differentiate this series from the older K7C.

Price incl. VAT €87.73