Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED Bulbs H11 12 V Pair of Pieces Chip Between Shiny Rods Cooler with Purple Base White-Yellow Light 4300 K Replacement for Halogen H11
LED Bulbs H11 12 V Pair of Pieces Chip Between Shiny Rods Cooler with Purple Base White-Yellow Light 4300 K Replacement for Halogen H11

LED Bulbs H11 12 V Pair of Pieces Chip Between Shiny Rods Cooler with Purple Base White-Yellow Light 4300 K Replacement for Halogen H11

Replace halogen H11 with LED featuring 4300 K light. Set of 2 pieces for 12 V, white-yellow hue, black holder with screw and ribbed cooler with purple section. Full description
In stock
€67.64
Safe shopping Safe shopping
Overview
LED Bulbs H11 12 V Pair of Pieces Chip Between Shiny Rods Cooler with Purple Base White-Yellow Light 4300 K Replacement for Halogen H11

These two LED bulbs with H11 base in this set are designed for cars that still use halogen H11 bulbs. When switched on, the bulbs emit white-yellow light at a temperature of 4300 K. They are intended for vehicles with a 12 V electrical system. The holder with the chip and two silver rods is secured in a black square holder with a screw. Following the blue ring is the cooler, whose ribs are black and the lower cylinder is purple.

  • Where H11 is Used — a number of car manufacturers use H11 bulbs in fog lights, and in some models, they also illuminate in dipped headlights. The type you need will be indicated by the marking on the original bulb.
  • Shade 4300 K — the white-yellow light at 4300 K is closer in colour to halogen than cool white, yet it is whiter. It is suitable for drivers who do not want a distinctly cool light from LED bulbs.
  • 12 V On-Board Network — the bulbs require 12 V, which is supplied by the on-board network of a standard passenger car. They are not intended for other voltages.
  • Square Holder — the black holder with sharp edges holds both the holder and both rods and is secured with a screw with a star head. There are longitudinal holes on the sides of the holder.
  • Illuminating Chip — the area of the chip with a yellow layer is located on the side of the holder, in the space between both rods. Both rods have a shiny silver surface.
  • Black Ribs and Purple Cylinder — the black ribs around and the purple cylinder beneath them together form the cooler. Between the base and the cooler is a blue ring.
  • Dimension Behind the Light — due to the purple cylinder and ribs, the LED bulb is deeper than the original halogen. Therefore, check how much space you have available behind the light. Also, account for space for the light cover.
  • Two Identical Pieces — by replacing both bulbs at once, you will achieve the same shade of 4300 K on both the left and right sides of the vehicle. This way, no difference between the sides will occur.
  • H11 Installation — remove the original halogen bulb when cool and insert the new LED bulb into the light in the same orientation. Do not touch the surface of the chip during handling.
  • Light Check — after installation, turn on the lights and check that both bulbs shine with the same brightness and the same shade. Any change in the height of the light is a reason to visit a service centre.
  • On the Road According to Regulations — not every halogen headlight is approved for LED bulbs, so check the applicable rules before installation.

Contents of the package:

  • 2x LED Bulb H11 4300 K

For both sides of the vehicle, the set includes 2 pieces of H11 LED bulbs. The light with a temperature of 4300 K has a white-yellow tone. The black holder, silver rods, and purple part of the cooler are typical features of their appearance. The marking on the old bulb and the free space behind the light should be checked before ordering. The set replaces H11 halogen bulbs in fog lights or headlights where this type is used.

Price incl. VAT €67.64