Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Car bulbs Halogen car bulbs LED Bulbs 9006 and HB4 Pair with 5570 CSP Chips Size 3.5 x 7.5 x 1.4 cm Black Cooling Body White 6000 K For Headlights Instead of Halogen
LED Bulbs 9006 and HB4 Pair with 5570 CSP Chips Size 3.5 x 7.5 x 1.4 cm Black Cooling Body White 6000 K For Headlights Instead of Halogen
LED Bulbs 9006 and HB4 Pair with 5570 CSP Chips Size 3.5 x 7.5 x 1.4 cm Black Cooling Body White 6000 K For Headlights Instead of Halogen 1

LED Bulbs 9006 and HB4 Pair with 5570 CSP Chips Size 3.5 x 7.5 x 1.4 cm Black Cooling Body White 6000 K For Headlights Instead of Halogen

Set of two LED bulbs 9006 (HB4) for car headlights. 5570 CSP chips, white light 6000 K, black ribbed body and dimensions of each bulb 3.5 x 7.5 x 1.4 cm. Full description
In stock
€37.51
Safe shopping Safe shopping
Overview
LED Bulbs 9006 and HB4 Pair with 5570 CSP Chips Size 3.5 x 7.5 x 1.4 cm Black Cooling Body White 6000 K For Headlights Instead of Halogen

The set is designed for cars with headlights that use socket 9006 (HB4) and contains two LED bulbs. The bulbs feature 5570 CSP chips positioned on a light beam with a black pattern. The light has a white shade with a temperature of 6000 K. The black cooler with ribs connects to the neck with a red ring. Each bulb measures 3.5 x 7.5 x 1.4 cm according to specifications.

  • 9006 or HB4 — in catalogues and on bulbs, this socket is listed under both names, but it is the same type. If your old bulb has one of these designations on the socket, this set is suitable for it.
  • Where 9006 is installed — it is often used for dipped headlights, but some vehicles have this socket in fog lights. The decisive factor is always the type specified for the particular car.
  • Colour and temperature — halogen bulbs 9006 emit warm, yellowish light. These LED bulbs instead emit white light at 6000 K. The difference in shade is particularly noticeable when viewing the car from the front.
  • Chip area — the 5570 CSP chips are concentrated in a single yellow area at the top of the beam. Below the chip area, there is a round element with a golden centre on the beam.
  • Black cooling — the cooler, like the neck, is black and has dense ribs around its perimeter. Air can circulate between them, dissipating heat.
  • Space check — the bulbs measure 3.5 x 7.5 x 1.4 cm, and the rear part with the cooler takes up some space behind the headlight. If it is tight there, fitting the cover may be problematic.
  • Both sides of the car — if only one bulb is replaced, one light will shine white and the other will have a halogen tone. The set of two prevents this.
  • Installation of 9006 — halogens heat up when lit, so allow them to cool for a while after turning off the lights. Handle the new bulb by the cooler and do not touch the chips.
  • Check after switching on — turn on the lights and check the function of both bulbs. Also, ensure both lights are aimed the same way. If they shine at a different height after replacement, consult a service.
  • Regulations for LEDs — whether you can use LED bulbs in halogen headlights on the road depends on applicable regulations. Check these before installation. A service or technical inspection station can also advise you.

Contents of the package:

  • 2x LED Bulb with socket 9006/HB4

For two headlights, just these 2 pcs of LED bulbs 9006 (HB4) are sufficient. Each bulb is equipped with 5570 CSP chips and emits white light at a temperature of 6000 K. Both bulbs have a black cooler and a red ring on the neck. With the dimensions of 3.5 x 7.5 x 1.4 cm per bulb, you can easily estimate if there will be enough space behind the headlight. The set is suitable for vehicles whose headlights use bulbs 9006 or HB4.

Price incl. VAT €37.51