Home page Home page Auto & Moto Car bulbs LED headlight bulbs LED Bulb Set H7 K69-H7-6K 2 pcs 12 V 300 W Black Base and Silver Cooler Cool White 6000 K For Car Headlights
LED Bulb Set H7 K69-H7-6K 2 pcs 12 V 300 W Black Base and Silver Cooler Cool White 6000 K For Car Headlights

LED Bulb Set H7 K69-H7-6K 2 pcs 12 V 300 W Black Base and Silver Cooler Cool White 6000 K For Car Headlights

Two H7 LED bulbs for cars with a 12 V onboard network. Cool white 6000 K, power 300 W, code K69-H7-6K, black base and silver ribbed cooler. Full description
In stock
€41.88
Safe shopping Safe shopping
Overview
LED Bulb Set H7 K69-H7-6K 2 pcs 12 V 300 W Black Base and Silver Cooler Cool White 6000 K For Car Headlights

The package contains two LED bulbs for cars with a H7 base, designed to replace halogen bulbs of the same type. The light from the bulbs has a cool white colour of 6000 K. They require 12 V for connection and have a stated power of 300 W. The base consists of a black flange with a protrusion, above which is a silver neck with a flat carrier for the LED chips. Below the flange, the bulb continues with a robust cooler featuring slanted ribs.

  • H7 Usage — H7 bulbs can be found in the dipped or main beam headlights of many vehicles. You can find the specific fitting for your car in the manual or from the original bulb. When selecting, follow the marking on the original bulb, not just the shape of the headlight.
  • Base Flange — the black flange has a protrusion around its circumference that determines the position of the bulb in the headlight. This prevents the bulb from being inserted incorrectly.
  • Product Code — the set is referenced by the code K69-H7-6K, which includes the H7 base designation.
  • Colour 6000 K — the light is white with a cool tone, significantly differing in colour from the original halogens. The difference is especially noticeable when compared to vehicles that use halogen bulbs.
  • Chips and Carrier — the yellow LED chips are mounted on a flat carrier that extends above the base flange.
  • Cooling Ribs — the ribs below the flange are angled, and the lower part of the cooler forms a cylinder with grooves. The cooler dissipates heat from the chips into the air behind the headlight.
  • Voltage 12 V — the set is designed for cars with a twelve-volt battery. It is not suitable for vehicles with 24 V voltage.
  • Same Light Left and Right — both bulbs in the set are identical, ensuring that the headlights on both sides will have a uniform colour. If only one bulb is replaced, the sides may differ in colour.
  • Space for Cooler — the cooler protrudes behind the headlight further than the original bulb. If space is tight behind the headlight, the original cover may not fit.
  • Installation — insert the bulb into the headlight with the flange protrusion in the groove and secure it just like the original bulb. Do not touch the LED chips during this process.
  • Check After Replacement — after installation, check that both lights are functioning and that the light boundary is not higher than before. Have the headlight alignment checked at a technical inspection station or service if necessary.
  • Road Use — before driving on the road with LED bulbs, check whether the applicable regulations permit this for your vehicle and headlight.

Contents of the package:

  • 2x H7 LED bulb for cars

The K69-H7-6K set contains two LED bulbs with an H7 base and a black flange. The light has a cool white colour of 6000 K and the product has a stated power of 300 W. The bulbs are connected to cars with a 12 V onboard network. The cooler with slanted ribs below the flange dissipates heat from the LED chips. If your vehicle uses H7 bulbs and there is sufficient space behind the headlight, you can order the set directly.

Price incl. VAT €41.88