Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Car bulbs LED headlight bulbs H7 LED Car Bulbs for 12 V Pair Black Base with Blue Ring and Black-Purple Heat Sink White-Yellow 4300 K For Main Headlights of Cars
H7 LED Car Bulbs for 12 V Pair Black Base with Blue Ring and Black-Purple Heat Sink White-Yellow 4300 K For Main Headlights of Cars
H7 LED Car Bulbs for 12 V Pair Black Base with Blue Ring and Black-Purple Heat Sink White-Yellow 4300 K For Main Headlights of Cars 1

H7 LED Car Bulbs for 12 V Pair Black Base with Blue Ring and Black-Purple Heat Sink White-Yellow 4300 K For Main Headlights of Cars

White-yellow LED light 4300 K instead of halogen H7. Two bulbs for 12 V with a black base, silver rods at the chip and a heat sink with a purple cylinder. Full description
In stock
€66.77
Safe shopping Safe shopping
Overview
H7 LED Car Bulbs for 12 V Pair Black Base with Blue Ring and Black-Purple Heat Sink White-Yellow 4300 K For Main Headlights of Cars

Transform your halogen H7 headlights to LED light with this pair of bulbs featuring a H7 base. The colour temperature of 4300 K corresponds to white-yellow light. The operating voltage of both units is 12 V. The black base with a side projection sits above the blue ring and the heat sink. Above the base is a square holder with a screw, from which a beam with a chip and two silver rods protrudes.

  • Where to find H7 — many cars use H7 bulbs in their main headlights, depending on the vehicle design, as dipped or main beam lights. You can determine which base type your car has by checking the inscription on the old bulb or in the vehicle manual.
  • Base with projection — the black H7 base has one prominent projection on its circumference. This helps you identify how to orient the bulb in the headlight.
  • White-yellow shade — 4300 K is a warmer variant of white light. Compared to cool white, the light appears less blue, and compared to halogen, it is whiter.
  • Vehicle voltage — the bulbs require 12 V from the car battery and electrical system to operate. This is the standard voltage for most personal vehicles.
  • Top part of the bulb — the square black part above the base holds the beam with the chip and is secured with a star-headed screw. Narrow longitudinal grooves are visible in the holder beside the screw.
  • Rods and chip — two shiny silver rods protrude from the sides of the chip, with a yellow area of the chip in between. The rods are taller than the black holder and run along the entire length of the chip.
  • Black-purple heat sink — dense black fins are located at the top of the heat sink, while the lower cylinder is purple. There are narrow gaps between the fins.
  • Depth check — before purchasing, check how much space is behind the headlight. The LED bulb with a purple heat sink requires more space than a halogen bulb.
  • For both headlights — with two units, you can replace the H7 in both headlights, avoiding a mismatch in light colour between left and right.
  • Replacing the H7 bulb — remove the cooled halogen bulb, insert the LED bulb with the projection into the cut-out, and secure it with the clip.
  • After installation — turn on the lights against a wall and compare the left and right sides. If the light is uneven or too high, have it adjusted at a service centre.
  • Road rules — LED H7 bulbs in halogen headlights may not be permissible for road use, so check in advance what applies to your vehicle.

Package contents:

  • 2x H7 Bulb with LED Chip

This pair of H7 LED bulbs in a package of 2 pcs will cover both main headlights. The white-yellow shade of 4300 K is warmer than standard cool white. The black base with a projection, blue ring, and purple heat sink create a distinctive appearance for the bulbs. Before ordering, check the marking on the old bulb and measure the space behind the headlight. This set serves as a replacement for halogen H7 bulbs in 12 V headlights.

Price incl. VAT €66.77