Home page Home page Auto & Moto Car bulbs LED headlight bulbs H7 LED Bulbs with 5570 CSP Chips Set of 2 3.5 x 7.5 x 1.4 cm Black Base and Red Ring Cooler White 6000 K For Car Headlights
H7 LED Bulbs with 5570 CSP Chips Set of 2 3.5 x 7.5 x 1.4 cm Black Base and Red Ring Cooler White 6000 K For Car Headlights

H7 LED Bulbs with 5570 CSP Chips Set of 2 3.5 x 7.5 x 1.4 cm Black Base and Red Ring Cooler White 6000 K For Car Headlights

White LED light 6000 K instead of halogen H7. Pack of 2 with 5570 CSP chips, black base and finned cooler, dimensions 3.5 x 7.5 x 1.4 cm. Full description
In stock
€39.26
Safe shopping Safe shopping
Overview
H7 LED Bulbs with 5570 CSP Chips Set of 2 3.5 x 7.5 x 1.4 cm Black Base and Red Ring Cooler White 6000 K For Car Headlights

If you have halogen H7 bulbs in your car and want white LED light, this set of two LED bulbs with H7 base is the perfect solution. Each bulb shines using 5570 CSP chips positioned on a flat light-emitting substrate. The colour temperature of 6000 K corresponds to a white shade of light. The base consists of a black flange with a protrusion, beneath which is a red ring and a black finned cooler. The product has dimensions of 3.5 x 7.5 x 1.4 cm for one unit.

  • Headlights for H7 — the H7 base is commonly used in the main headlights of passenger cars, serving either for dipped or main beam lights. Whether your vehicle uses it is determined by the marking of the original bulb.
  • Base Shape — the base features a black collar with a side protrusion. This fits into a groove when inserting into the headlight, ensuring the correct position of the bulb. Both the flange and cooler are black in colour.
  • 5570 CSP Chips — the chips form a single light-emitting block on the substrate. Surrounding it is black graphics, with stripes branching out at the top and bottom ends of the substrate.
  • White Light — due to the value of 6000 K, the light is white, without the warm tint of halogen H7 bulbs. Thus, the colour of the light emitted by the car changes after replacement.
  • Cooler and Ring — beneath the flange is a red ring, followed by a black cooler with fins all around. The finning serves to cool the chips during operation.
  • Clearance — the LED bulb measuring 3.5 x 7.5 x 1.4 cm requires space behind the headlight for the cooler. Therefore, it is advisable to check if the original cover can be fitted in some vehicles.
  • Set for Both Right and Left Side — you can replace two identical bulbs simultaneously in both the right and left headlights, ensuring the light colour is consistent on both sides.
  • H7 Replacement — remove the halogen bulb only when it has cooled down. Then install the LED bulb so that the protrusion on the base collar fits in the same place as the original bulb, and secure it.
  • Light Test — after replacement, switch on the lights and check both sides of the vehicle. If the light beam is higher or lower than before, consult a service for adjustment.
  • Driving with LEDs — on public roads, it is necessary to comply with vehicle lighting regulations. Verify in advance whether you are allowed to use LED bulbs in your halogen headlights.

Contents of the package:

  • 2x H7 LED Bulb with Cooler and Flange

The pack of 2 units of H7 bulbs is sufficient for both front headlights. The light with a temperature of 6000 K is produced by the 5570 CSP chips. The base has a black flange with a protrusion and a red ring beneath it. With the dimensions of 3.5 x 7.5 x 1.4 cm, you can check in advance whether the bulb will fit behind the headlight. This set is suitable for vehicles that have H7 bulbs in their headlights.

Price incl. VAT €39.26