Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Auto & Moto Car bulbs Halogen car bulbs H11 LED Car Bulbs for 12 V Two Pieces Square Black Part with Screw Black Fins and Purple Cylinder Cool White 6000 K Instead of Halogen H11
H11 LED Car Bulbs for 12 V Two Pieces Square Black Part with Screw Black Fins and Purple Cylinder Cool White 6000 K Instead of Halogen H11
H11 LED Car Bulbs for 12 V Two Pieces Square Black Part with Screw Black Fins and Purple Cylinder Cool White 6000 K Instead of Halogen H11 1

H11 LED Car Bulbs for 12 V Two Pieces Square Black Part with Screw Black Fins and Purple Cylinder Cool White 6000 K Instead of Halogen H11

Set of 2 H11 LED bulbs for 12 V emits cool white 6000 K. Chip between the rods, square black part with screw and cooler ending in a purple cylinder. Full description
In stock
€62.84
Safe shopping Safe shopping
Overview
H11 LED Car Bulbs for 12 V Two Pieces Square Black Part with Screw Black Fins and Purple Cylinder Cool White 6000 K Instead of Halogen H11

This pair of LED bulbs with H11 base is designed for lights with halogen H11 bulbs. Their light corresponds to the shade of cool white 6000 K. They operate on a board voltage of 12 V. At the top of each bulb is a chip with a yellow area, flanked by two silver rods. Below is a blue ring, black fins of the cooler, and a purple cylinder.

  • Lights with H11 — the H11 base is primarily found in fog lights, and sometimes in dipped beam headlights. What your vehicle has can be determined by the label on the original bulb. If the label is missing, the bulb type can be found in the vehicle manual.
  • White Shade 6000 K — 6000 K is a cool white without a yellow undertone, easily distinguishable from halogen light. After replacement, the difference compared to the previous light is immediately noticeable.
  • Board Voltage — the set is designed for 12 V. Do not use it for other voltages. Common personal vehicles operate on a twelve-volt system.
  • Body with Star Screw — the screw with a star head sits on the side of the square black part, which also has elongated openings. A beam extends from the part, carrying the chip.
  • Pair of Rods — the silver rods stand on either side of the chip and are taller than the black part. The rods have a smooth surface and cylindrical shape.
  • Fins and Purple Base — the cooler has dense black fins, beneath which is a purple cylinder. The cylinder seals the bulb at the bottom end and is the most prominent colour element.
  • Space Behind the Light — the cooler requires free space, so please check the depth behind the light and the possibility of fitting a cover before purchase. Access to the bulb may be restricted in some vehicles.
  • Colour on Both Sides — with two pieces in the package, the lights will not have a different shade. Replacing only one bulb means different light on the right and left.
  • Procedure for H11 — keep the lights off until the halogen cools down, and only then remove it. Hold the new bulb by the cooler and insert it in the same position. Avoid touching the luminous area of the chip with your fingers.
  • Test After Installation — turn on the lights and compare both sides. If there is a difference, have the headlights adjusted. The tilt of the headlights will be set by the service.
  • Regulations for Use — check whether LED bulbs in halogen lights are permitted on the road in the regulations or at the service before installation. Rules may also vary between different countries.

Package Contents:

  • 2x H11 LED car bulb 6000 K

The set includes 2 pieces of H11 LED bulbs for 12 V. The cool white 6000 K is identifiable by its pure white tone without a yellow component. The appearance of both pieces is identical, from the black part to the purple base of the cooler. Before purchasing, compare the marking on the old bulb with the H11 type. The set is suitable where the vehicle uses H11 halogen bulbs.

Price incl. VAT €62.84