Home page Home page Mobile Phones, Smartwatches & Tablets Mobile Phone Accessories Phone Holders Flexible Arm with Ball Head 17 mm for Car 155 x 49 mm Self-Adhesive Base for Phone Holder 360° Rotatable Black For Dashboard
Flexible Arm with Ball Head 17 mm for Car 155 x 49 mm Self-Adhesive Base for Phone Holder 360° Rotatable Black For Dashboard

Flexible Arm with Ball Head 17 mm for Car 155 x 49 mm Self-Adhesive Base for Phone Holder 360° Rotatable Black For Dashboard

Mouldable base for holders with a 17mm joint. Attach it to the dashboard or behind the display, and then rotate the phone exactly as needed. Full description
In stock
€27.03
Safe shopping Safe shopping
Overview
Flexible Arm with Ball Head 17 mm for Car 155 x 49 mm Self-Adhesive Base for Phone Holder 360° Rotatable Black For Dashboard

The flexible arm with a ball head serves as a sturdy base for a phone holder in the car. At the end of the arm is a universal 17 mm ball head, onto which you can attach standard holder heads with the corresponding socket. The arm is attached using a self-adhesive base, which you stick onto a flat and clean surface of the dashboard. Thanks to its flexible shape, you can move the holder closer, higher above the dashboard, or lower so that it does not obstruct your view. The entire solution is discreet, black, and fits seamlessly into the interior of most cars.

The arm has a length of 155 mm when straightened, and the base has a width of 49 mm. The arm strap is flexible, allowing you to shape it into a curve, a hook shape, or keep it straight. According to the manufacturer's images, the arm can be bent approximately 180° and can rotate on the base 360°. The arm is mounted onto the base and secured with a rotating closure marked with the direction of opening, so you can easily remove it if necessary, leaving the base stuck in place. The mouldable arm can also be used, as per the manufacturer's images, by bending it over the top edge of the display and sticking the base onto its back side.

  • Type – base with flexible arm for car phone holder
  • Ball Head – 17 mm, universal standard for holder heads
  • Dimensions – arm length 155 mm, base width 49 mm
  • Mounting – self-adhesive base on dashboard
  • Adjustment – flexible arm and rotation on base 360°
  • Colour – black
  • Brand – Untoom
  • Package Contents – 1x flexible arm with 17 mm ball head and 1x self-adhesive base

Before sticking the base, thoroughly clean and degrease the surface to ensure the adhesive layer adheres well. Press the base down and let it sit for a while, only then attach the arm and holder head. Adjust the shape of the arm gradually and carefully, so that the holder fits exactly where you want it. If you wish to reposition the arm, loosen the rotating closure and remove it from the base.

This base is a practical accessory for anyone who already has a phone holder head with a socket for a 17 mm ball joint and is looking for a stable location in the car. The flexible arm allows for much freer positioning of the phone than a fixed suction cup or clip into the ventilation grille. The self-adhesive base holds on the dashboard, and you can remove the arm from it at any time. The compact black design is unobtrusive and suitable for both passenger and commercial vehicles. You can choose the phone holder head according to your phone and preferences.

Price incl. VAT €27.03