LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Battery Accessories Car Battery Chargers Wallbox Type 2 Electric Vehicle Charger 11 kW 16 A Three-Phase 4.3-Inch LCD Display WiFi App and RFID Cable 5 m Silver-Black
Wallbox Type 2 Electric Vehicle Charger 11 kW 16 A Three-Phase 4.3-Inch LCD Display WiFi App and RFID Cable 5 m Silver-Black

Wallbox Type 2 Electric Vehicle Charger 11 kW 16 A Three-Phase 4.3-Inch LCD Display WiFi App and RFID Cable 5 m Silver-Black

Three-phase wallbox for electric vehicles with charging history in the app, household load balancing, 3 RFID cards, and type B residual current device. Full description
In stock
€603.01
Safe shopping Safe shopping
Overview
Wallbox Type 2 Electric Vehicle Charger 11 kW 16 A Three-Phase 4.3-Inch LCD Display WiFi App and RFID Cable 5 m Silver-Black

The electric vehicle charger charges cars with a Type 2 connector at a power of up to 11 kW with a current of 16 A in a three-phase network. On the front side, there is a 4.3-inch LCD display that shows voltage, current, power, energy consumed, temperature, as well as the set delayed start and charging time. You can control the charging via the app connected to WiFi, touch buttons on the station, or an RFID card. The Wallbox stores the charging history and fault records, so you have an overview of consumption and any errors. The silver-black charging station with a 5 m cable is designed for permanent wall mounting in the garage, under a shelter, or outdoors.

  • Charging Power — The station connects to a three-phase network with a voltage of 380 V ± 20 % and achieves a power of up to 11 kW at a current of 16 A. The actual charging speed also depends on the vehicle's onboard charger.
  • Adjustable Current — Use the A button or the app to set the charging current in steps of 8, 10, 13, and 16 A according to the capabilities of the electrical installation and circuit breaker.
  • App and Charging History — In the app, you can monitor the charging status in real-time, start or stop charging remotely, and schedule charging times. The Wallbox retains data on charging for the last 12 months and separately records operational and fault reports.
  • Load Balancing — The station supports load balancing using current sensors on the household's main supply. It monitors the total consumption across all phases and adjusts the charging current to prevent overloading the main circuit breaker.
  • RFID Cards — Charging can be initiated by holding an RFID card to the reader, preventing unauthorised use of the station. The package includes 3 cards.
  • Overheating Protection — At temperatures above 70 °C, the station automatically reduces the charging current, and at 85 °C, it interrupts charging for 0.2 seconds and resumes it once the temperature drops to 65 °C.
  • Safety Features — The Wallbox has a type B residual current device for AC 30 mA and DC 6 mA, protection against overvoltage and undervoltage, overcurrent, short-circuit, and lightning, as well as grounding and relay protection. There is an emergency button on the side for immediate shutdown.
  • Durability and Cable — The control unit has an IP66 rating and the connector is IP65 rated, with the station operating in temperature ranges from -30 to +50 °C. The TPU cable with copper conductors and a cross-section of 5G 2.5 mm² + 1 x 0.5 mm² measures 5 m, and the Type 2 connector complies with the IEC 62196-2 standard.
  • Package Contents — 1x charging station with 5 m cable and Type 2 connector, 3x RFID card, 1x connector holder, 1x wall mount, 1x current sensor with cable and connectors, screws and plugs

The electric vehicle charger is suitable for regular home charging of electric vehicles or plug-in hybrids from a three-phase connection. The large display and app with charging history provide an overview of each charge and energy consumed. Thanks to load balancing, the station monitors the total consumption of the household and protects the main circuit breaker from overload. The station is permanently connected to the electrical installation, so have the installation carried out by an electrician. The 5 m cable with a Type 2 connector reaches the charging port of most vehicles parked at the station.

Price incl. VAT €603.01