LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Router Accessories Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 1
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 1
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 2
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 3
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 4
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads 5

Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads

Single tooth mill for milling M1 threads with a pitch of 0.25 mm on CNC machines. Entirely made from sintered carbide, with a cylindrical shank diameter of 4 mm. Full description
In stock
€48.43
Safe shopping Safe shopping
Overview
Thread Mill M1 x 0.25 mm Single Tooth Shank 4 mm Solid Carbide CNC Mill from Sintered Carbide Silver Milling of M1 Threads

The single tooth thread mill for thread M1 x 0.25 mm is designed for milling very small metric threads on CNC milling machines and machining centres. The entire mill is made from sintered carbide, which is a hard material commonly used for precision cutting tools. The thread is not created by cutting with a tap, but by gradually milling along the helix, which is controlled by the CNC machine program. The mill has one tooth with a thread profile and is clamped with a cylindrical shank of 4 mm diameter. The surface of the tool is silver.

  • Thread M1 x 0.25 mm — the mill is intended for metric thread M1 with a pitch of 0.25 mm. This is a very fine thread, used for example in miniature screw connections in precision mechanics, modelling, or electronics.
  • Single Tooth Profile — at the end of the mill is one tooth with a thread profile. The thread is thus created gradually along its entire length, and its depth is determined by the program, not the length of the tool.
  • Milling along the Helix — the machine guides the mill along the helix, known as helical interpolation. Therefore, the CNC machine must support this movement, and the program must correspond to the pitch of 0.25 mm.
  • Solid Carbide Design — the body and tooth of the mill are made from one piece of sintered carbide. This material is significantly harder than tool steel and maintains its shape even during precise machining.
  • Shank D4 — the cylindrical shank has a diameter of 4 mm and is clamped into a collet or holder for this diameter. The thicker shank transitions into a thin neck with the cutting part.
  • Right and Left Hand Threads — the direction of the thread is determined by the direction of the helix in the program. The same mill can thus be used to mill both right and left hand threads M1 x 0.25 mm, depending on the settings.
  • Pre-drilled Hole — before milling the internal thread, it is necessary to drill a hole of the corresponding diameter. Choose the hole size according to the tables for thread M1. The hole should be clean and free of burrs so that the mill can safely enter it.
  • Careful Handling — the cutting part for thread M1 is very thin and can break under overload. Use appropriate feeds and a machine with a precise and stable spindle. Store the mill in a case to prevent damage to the fine tooth.
  • Contents of Package — 1x single tooth thread mill M1 x 0.25 mm with a 4 mm shank.

The single tooth thread mill M1 x 0.25 mm is designed for milling miniature metric threads on CNC machines. The solid carbide design gives the tool the hardness necessary for precise work. Thanks to the single tooth profile, the thread is created gradually along the helix, and its length and direction are determined by the machine program. The mill is clamped with a cylindrical shank of 4 mm diameter. You will find it useful in the workshop and in production wherever you need to mill M1 threads.

Price incl. VAT €48.43