LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments

Tap aerators and attachments

Aerators and attachments that screw onto the tap spout — aerator screens, water-saving inserts, swivel and extension attachments and heads with a spray mode. Choose by the thread, usually M22 male or M24 female. Descale or replace a clogged screen.

38 products
1

Tap aerators and attachments

Parts that screw onto the end of the tap spout and shape the stream — aerators with an aerating screen, water-saving inserts with a limited flow, swivel and flexible attachments, spout extensions and heads with a spray mode.

The thread is decisive — the most common are M22 male and M24 female, but there are also smaller sizes and adapters between them. Choose tap aerators and attachments by the thread on your tap and by the stream you want — full, aerated or spray.

Water-saving aerators mix air into the stream and limit the flow, so less water comes out of the tap while the stream still feels full. With instantaneous water heaters, check that the resulting flow is enough to switch them on.

Over time the screen clogs with limescale and dirt — the stream then weakens or sprays to the side. Unscrew the attachment, rinse and descale the screen or replace it with a new one; when fitting it, do not forget the seal and do not overtighten.

The material is usually brass, stainless steel or plastic, and the finish is chosen to match the tap. Always follow the manufacturer's instructions, which also apply to the thread size, cleaning and maximum working pressure.