LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Router Accessories Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 1
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 1
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 2
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 3
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 4
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2 5

Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2

Single-point mill for thread M1.2 with a pitch of 0.25 mm. Made entirely from carbide, with a 4 mm cylindrical shank, for helical milling on CNC machines. Full description
In stock
€43.19
Safe shopping Safe shopping
Overview
Single-Point Thread Mill M1.2 x 0.25 mm Shank 4 mm Carbide Solid Carbide Silver For CNC Milling Machines Thread Milling M1.2

This thread mill with a single point is designed for metric thread M1.2 x 0.25 mm and is used on CNC milling machines and machining centres. It is made entirely from solid carbide, a hard tool material suitable for precise machining. The thread is not produced by a tap, but by milling, during which the machine guides the tool along a helix according to the programme. The cutting head at the end of the tool carries one row of thread profile. The mill is clamped with a cylindrical shank of 4 mm diameter and has a silver surface.

  • Thread size M1.2 — the tool is designed for a metric thread with a nominal diameter of 1.2 mm and a pitch of 0.25 mm. Such small threads are used, for example, in small screws in precision mechanics, electronics, or modelling.
  • One row of profile — the mill has one tooth with a thread profile at the end. The thread is not created all at once along its entire length, but gradually, and its length is determined by the tool's path in the programme.
  • Helical interpolation — during milling, the tool rotates and simultaneously moves along a helix with a pitch of 0.25 mm. The machine's control system must be capable of this movement, and the programme must correspond to the thread size.
  • Material solid carbide — both the shank and the cutting part are made from a single piece of carbide. This material is harder than tool steel and retains the sharp edge of the tooth well.
  • Flutes on the cutting head — the image shows longitudinal flutes at the end of the tool, which form the cutting edges and remove chips from the cutting area.
  • 4 mm shank clamping — the cylindrical shank is clamped in a collet or holder for a diameter of 4 mm. The shank is followed by a narrower neck, allowing the cutting part to enter a hole.
  • Thread direction according to the programme — whether a right-hand or left-hand thread is created depends on the direction of the helix set in the programme. One mill can thus serve for both directions.
  • Preparation of the hole — the internal thread is milled into a pre-drilled hole. Choose its diameter according to the tables for thread M1.2 and clean the hole of chips and burrs before milling.
  • Thin cutting part — the tooth for thread M1.2 is very small and may break under overload. Choose appropriate feeds and work on a machine with a precise and stable spindle. Store the tool in a case to prevent damage to the tooth edge.
  • Contents of the package — 1x single-point thread mill M1.2 x 0.25 mm with a 4 mm shank.

The single-point mill for thread M1.2 x 0.25 mm is used for producing small metric threads on CNC milling machines. The carbide construction provides the tool with the hardness necessary for precise machining. The thread is formed gradually along the helix, and its length and direction are controlled by the machine's programme. The mill is inserted into the holder with a cylindrical shank of 4 mm. It finds application in workshops and production where it is necessary to mill threads M1.2.

Price incl. VAT €43.19