LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Battery Accessories Car Battery Chargers Portable Charger for Electric Vehicles Type 1 J1772 Plug Schuko 3.6 kW 6 to 16 A Cable 10 m LCD Display IP66 Black For Standard Socket
Portable Charger for Electric Vehicles Type 1 J1772 Plug Schuko 3.6 kW 6 to 16 A Cable 10 m LCD Display IP66 Black For Standard Socket

Portable Charger for Electric Vehicles Type 1 J1772 Plug Schuko 3.6 kW 6 to 16 A Cable 10 m LCD Display IP66 Black For Standard Socket

Charger for electric cars with Type 1 socket for standard socket. Current 6 to 16 A, display, IP66 rating, and a long 10 m cable for easy connection to the vehicle. Full description
In stock
€226.59
Safe shopping Safe shopping
Overview
Portable Charger for Electric Vehicles Type 1 J1772 Plug Schuko 3.6 kW 6 to 16 A Cable 10 m LCD Display IP66 Black For Standard Socket

The portable charger for electric vehicles with a Type 1 J1772 connector allows you to charge your electric car or plug-in hybrid directly from a standard household socket with a Schuko plug. The control unit allows you to set the charging current in steps of 6, 8, 10, 13, and 16 A with a power output of up to 3.6 kW. The display shows the set current, voltage, current power, temperature, charging time, and energy consumed. The 10 m long cable reaches from the socket to the vehicle's charging port, even when the socket is further from the parking spot. The black charger with an IP66 rating is suitable for use at home and on the go as a backup charging solution.

  • Charging from a standard socket — The charger plugs into a standard socket with a Schuko plug, so you do not need a wallbox or special connection. It operates within a voltage range of 85 to 265 V and at a frequency of 50 or 60 Hz.
  • Adjustable current — Use the button on the control unit to switch the charging current between 6, 8, 10, 13, and 16 A. Choose a lower current for older electrical installations or when used alongside other devices on the same circuit.
  • Display and LED indication — The display shows the set current, voltage, power, temperature, charging time, and energy consumed in kWh. A light strip on the front indicates the charging status, readiness, and any errors.
  • IP66 resistance — The control unit has an IP66 rating against dust and powerful water jets, allowing it to be used outdoors. It can withstand a fall from a height of 1 m and being run over by a vehicle weighing 2 tonnes.
  • Type 1 connector — The connector complies with the J1772 standard and is designed for vehicles with a Type 1 socket. It has copper contacts with a silver-plated surface and a mechanical latch that holds the connector in the vehicle during charging. A protective cap is included.
  • Cable — The charging cable measures 10 m and has copper conductors with a cross-section of 3G 2.5 mm² + 2 x 0.5 mm². You will appreciate the longer cable if you park further from the socket or have the charging port on the opposite side of the vehicle.
  • Wall mount — On the back of the control unit, there is a hole for wall mounting, so you can keep the charger handy in the garage without it lying on the floor.
  • Package contents — 1x portable charger with control unit, Schuko plug, and 10 m cable with Type 1 connector

The portable charger for electric vehicles is a practical solution for owners of electric cars and plug-in hybrids who want to charge without installing a wallbox. Just plug it into a standard Schuko socket and connect it to the vehicle with the Type 1 connector. The adjustable current allows you to adapt the charging to the capabilities of your electrical installation, and the display shows the charging progress. Thanks to the IP66 rating and the durable housing of the control unit, you can use it outdoors in any weather. The charger easily fits into the car boot, so you will have it handy on trips, at the cottage, or at family gatherings.

Price incl. VAT €226.59