LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Dash Cams Hardwire Kit for Car Camera AZDOME JYX05 M660/M550 Max/M300S/GS63H Pro USB-C 12–24 V to 5 V 2.5 A Parking Mode Battery Protection Black
Hardwire Kit for Car Camera AZDOME JYX05 M660/M550 Max/M300S/GS63H Pro USB-C 12–24 V to 5 V 2.5 A Parking Mode Battery Protection Black

Hardwire Kit for Car Camera AZDOME JYX05 M660/M550 Max/M300S/GS63H Pro USB-C 12–24 V to 5 V 2.5 A Parking Mode Battery Protection Black

Power the camera from the fuse box for 24-hour parking mode. USB-C connector, input 12–24 V, output 5 V 2.5 A, 4 levels of battery protection and fuses. Full description
In stock
€56.29
Safe shopping Safe shopping
Overview
Hardwire Kit for Car Camera AZDOME JYX05 M660/M550 Max/M300S/GS63H Pro USB-C 12–24 V to 5 V 2.5 A Parking Mode Battery Protection Black

The hardwire kit AZDOME JYX05 powers the dash camera directly from the vehicle's fuse box. It is designed for AZDOME cameras with a USB-C connector, including models M660, M550 Max, M300S, and GS63H Pro. The converter transforms the onboard voltage of 12–24 V to a stable 5 V with a current of up to 2.5 A and automatically detects whether the vehicle is 12V or 24V. The three-wire connection allows the camera to record not only while driving but also in parking mode after the engine is turned off. The black cable can be routed discreetly under the upholstery, leaving the cigarette lighter socket free.

  • Compatibility — the kit is intended for AZDOME cameras M660, M550 Max, M300S, and GS63H Pro. According to the manufacturer, it can also be used with models M550, M550 Pro, GS63H, PG17, PG17 Pro, and PG17 Max. It is not suitable for cameras with a micro USB or mini USB connector.
  • Three-wire connection — the red wire (BAT+) connects to a permanently powered fuse, the yellow wire (ACC) connects to a switched fuse, and the black wire (GND) with a loop connects to a metal screw or the vehicle chassis.
  • Parking mode — thanks to the permanent battery power, the camera can monitor the vehicle even after parking and switch to parking mode after the ignition is turned off.
  • Adjustable battery protection — using the switch on the converter, you can select one of 4 levels of cut-off voltage: 11.8 / 12.0 / 12.2 / 12.4 V for 12V battery or 23.6 / 24.0 / 24.4 / 24.8 V for 24V battery (±0.1 V). When the voltage drops below the set value, the converter disconnects the power to allow the car to start.
  • Multiple protections — the electronics protect against overcurrent, short circuit, overheating, and battery discharge. The fuse splitter has protection against incorrect connection; it does not power the device when connected incorrectly.
  • Fuse splitters — the kit includes cables for 4 types of flat fuses: ACZ (Micro2), ACS (Mini), ACN (LP Mini), and ACU (ATO), each type 2x with a length of 17 cm.
  • USB-C connector — the output cable is terminated with a straight type C connector and is equipped with a noise suppression ferrite filter.
  • Installation procedure — locate the fuse box, use a tester to identify the ACC and BAT+ fuses, select the appropriate type of splitter, connect the wires, ground the black wire, and test the camera before finalising the cable routing.
  • Package contents — 1x power cable with converter AZDOME JYX05, 8x fuse splitter (2x ACZ, 2x ACS, 2x ACN, 2x ACU), 8x fuse, 1x fuse puller.

The AZDOME JYX05 kit is suitable for drivers who want their dash camera to be powered continuously without a cable running to the cigarette lighter. With a wide input range, it can be used in vehicles with 12 V and 24 V onboard voltage. The adjustable cut-off threshold helps protect the car battery during prolonged standing. The four types of fuse splitters facilitate connections in various types of vehicles. Before purchasing, please ensure that your camera has a USB-C connector and supports parking mode.

Price incl. VAT €56.29