LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Spare Parts Fuel Hose AN10 1.2 m With Straight and 90° Angle Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator
Fuel Hose AN10 1.2 m With Straight and 90° Angle Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

Fuel Hose AN10 1.2 m With Straight and 90° Angle Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

Braided fuel hose AN10 with a length of 1.2 m for connecting the radiator. Fitted with a straight and a 90° angle fitting with a nut, black with red. Full description
In stock
€72.01
Safe shopping Safe shopping
Overview
Fuel Hose AN10 1.2 m With Straight and 90° Angle Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

The fuel hose AN10 is a replacement hose designed for connecting radiators with AN10 fittings. The hose has a length of 1.2 m and both ends are already fitted with fittings. One fitting is straight and the other is angled at 90°, making it easier to route the hose in areas where it needs to bend right at the fitting. The surface of the hose is covered with a black braid and the fittings are a combination of red and black. You can use this hose as a replacement for an old or damaged hose or for a new radiator installation.

  • Size AN10 — The hose and fittings are of size AN10, so you can connect them directly to the AN10 fittings on the radiator or on an adapter. Please verify the size of the fittings on the other part you will be connecting the hose to before installation.
  • Length 1.2 m — The hose measures 1.2 m. Before purchasing, measure the distance between the fittings to ensure the length of the hose matches your setup. Allow for extra length for bends so that the hose is not taut after installation.
  • Straight Fitting — One end has a straight fitting with a nut that screws onto the AN10 fitting. This is suitable where the hose runs directly to the fitting and there is enough space around it.
  • 90° Angle Fitting — The other end has a 90° angle fitting with a nut. This allows the hose to exit the fitting sideways, eliminating the need for sharp bends.
  • Braided Surface — The hose features a black braid on the surface that covers the inner hose along its entire length from one fitting to the other. The braid is securely attached to the collars of both fittings.
  • Installation — Slide the nut of the fitting onto the AN10 fitting and tighten it with an appropriate wrench. Then, connect the other end of the hose in the same manner. When routing the hose, ensure it is not kinked, taut, or in contact with sharp edges or hot engine parts.
  • Colour Design — The hose is black, the collars of the fittings are red, and the nuts and angled part are black.
  • Usage — The hose is used to connect the radiator with AN10 fittings to other components, such as an adapter for the oil filter. You will find it useful for repairs, replacing worn hoses, or vehicle modifications.
  • Package Contents — 1x fuel hose AN10 with a length of 1.2 m with straight and 90° angle fittings.

The fuel hose AN10 with a length of 1.2 m is a replacement hose for connecting radiators with AN10 fittings. It has a straight and 90° angle fitting with nuts at both ends. The black braid covers the hose along its entire length, and the fittings are in a combination of red and black. The hose is supplied with fittings already attached, so you can screw it directly onto AN10 fittings after unpacking. Before ordering, measure the distance between the fittings and verify their size.

Price incl. VAT €72.01