LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Measuring Instruments Protractors Digital Laser Angle Finder with Two Line Lasers and Magnets on Four Sides with Absolute and Relative Measurement and USB-C Charging
Digital Laser Angle Finder with Two Line Lasers and Magnets on Four Sides with Absolute and Relative Measurement and USB-C Charging

Digital Laser Angle Finder with Two Line Lasers and Magnets on Four Sides with Absolute and Relative Measurement and USB-C Charging

Two laser lines on both the left and right, magnets around the perimeter and zeroing on any surface. Degrees and percentage of slope, charging is done via a standard USB-C cable. Full description
In stock
Colour:
€64.15
Safe shopping Safe shopping
Overview
Digital Laser Angle Finder with Two Line Lasers and Magnets on Four Sides with Absolute and Relative Measurement and USB-C Charging

The angle finder features a line laser on both sides, allowing it to mark a straight line to the left and right in one position and extend the measured plane further into space. It operates in two modes, where the first displays the absolute angle relative to the horizontal plane and the second shows the angle relative to a zero that can be set on any inclined surface. The magnets are built into all four sides, allowing the device to cling to a metal surface and preventing it from slipping during use. Operation is managed by three buttons, one of which powers on the device and the laser, the second holds the reading or switches to percentage of slope, and the third sets the zero. At the top edge, there is a USB-C port for charging the built-in battery, and included in the package is a fabric case for storage along with the cable.

  • Two line lasers – beams project from both the left and right sides, allowing the line to extend across both sides of the workspace without moving the device.
  • Absolute angle measurement – upon activation, the display shows the slope relative to the horizontal plane, allowing for immediate determination of how many degrees the surface is inclined.
  • Relative measurement from the set zero – on an inclined surface, pressing zero establishes a custom zero and the device then shows only the difference from it, which simplifies copying the existing slope.
  • Magnetic attachment without holding – the magnetic sides hold the device on a saw blade, on a steel profile, and on a door frame, leaving both hands free for tools.
  • Tilt% unit switch – pressing switches the value from degrees to percentage of slope, which is used for pipe gradients, ramps, and guttering.
  • Data freeze on the display – the hold function locks the number, allowing the device to be removed from a position where it cannot be seen during measurement, and the value can be noted later.
  • Labels readable both ways – the level and hold symbols are displayed in two directions, making the reading legible even when the device is hanging upside down.
  • Slope direction indicator – arrows beside the number indicate the direction in which the surface slopes, speeding up the alignment process.
  • USB-C port on the top edge – charging is done via a standard cable, eliminating the need to purchase disposable batteries or change them mid-work.
  • Fabric case included – the soft cover protects the display and laser windows during transport in a bag with other tools.

Package contents:

  • 1x digital angle finder
  • 1x charging cable
  • 1x case

The device is suitable for adjusting mitre and table saws, for assembling furniture, door frames, and railings, as well as for measuring inclined structures. Before measuring, it is advisable to place the angle finder on a flat surface and set the zero, as absolute values are derived from the horizontal plane. It is advisable to wipe the magnetic sides before applying, as metal shavings between the magnet and the surface can lift the body and shift the reading. The laser must not be aimed at eyes, so the device should be rotated so that the line ends on the workpiece or wall and does not extend into the passage area. After use, the device should be wiped down, stored in the case, and charged as needed to ensure it is ready for the next measurement.

Price incl. VAT €64.15